Assigning An Image As A Contact Photo - Samsung Galaxy S III User Manual

Taking a Screen Shot
Also known as a screen capture, this feature allows you to mimic the
print screen function on most computers.
1. From the main Settings page, tap Motion.
2. Tap the desired on-screen motion option.
3. In a single motion touch and slide the Motion slider to the right
to turn it on.
4. Tap the desired on-screen motion option.
5. Although enabled by default, enable the Palm swipe to capture
field by placing a check mark in the adjacent field.
6. With the current screen showing the desired image, in a single
motion, place the side of your palm along the one side of the
device and then slowly swipe it in the opposite direction over
the screen.

Assigning an Image as a Contact Photo

1. From the Home screen, tap
2. Select a folder location and tap a file to open it.
3. With the image displayed, press
Set as
4. Tap a contact to make a selection.
5. Use the on-screen crop the image by dragging it around or out
from its corners.
6. Tap Done to store the new image.
Contact photo.
(Apps)
and then tap
Multimedia
(Gallery).
207