Samsung Galaxy S III User Manual page 207

3. Tap Scan and select the single device name to begin the
connection process to another Wi-Fi Direct compatible device.
– or –
Tap Multi-connect
begin the connection process to these Wi-Fi Direct compatible
devices.
Note: The target device must also have Wi-Fi Direct service active and
running before it can be detected by your device.
4. Tap Done. The direct connection is then established. Confirm
appears in the Status bar.
5. When prompted to complete the connection, the recipient
should tap OK. Your status field now reads "Connected" and
your connected device is listed within the Wi-Fi Direct devices
listing.
6. Each partner (including yourself) must then tap Accept to
consent to the new Wi-Fi Direct pairing.
To enable Share shot on Camera:
1. From the Home screen, tap
Mode)
2. If you are prompted to activate your Wi-Fi Direct connection,
tap OK and follow the activation procedures for Wi-Fi Direct.
Scan and select all the device names to
Share shot.
(Camera)
Multimedia
(Shooting
199