Attaching The Lens Cap; Cleaning The Projection Lens; Cleaning The Projector Cabinet - Sanyo PLC-XU105 Owner's Manual

Maintenance and Cleaning

Attaching the Lens Cap

When moving this projector or while not using it over an
extended period of time, replace the lens cap.
Attach the lens cap according to the following procedures.
1 Pass the string through a hole of the lens cap.
2 Turn over the projector and remove the screw with a
screwdriver.
3 Attach the string with lens cap to a hole at the bottom of the
projector and secure it with a screw.

Cleaning the Projection Lens

Unplug the AC power cord before cleaning.
Gently wipe the projection lens with a cleaning cloth that
contains a small amount of non-abrasive camera lens cleaner,
or use a lens cleaning paper or commercially available air
blower to clean the lens.
Avoid using an excessive amount of cleaner. Abrasive
cleaners, solvents, or other harsh chemicals might scratch the
surface of the lens.

Cleaning the Projector Cabinet

Unplug the AC power cord before cleaning.
Gently wipe the projector body with a soft dry cleaning cloth.
When the cabinet is heavily soiled, use a small amount of mild
detergent and finish with a soft dry cleaning cloth. Avoid using
an excessive amount of cleaner. Abrasive cleaners, solvents, or
other harsh chemicals might scratch the surface of the cabinet.
When the projector is not in use, put the projector in an
appropriate carrying case to protect it from dust and scratches.
56
Lens Cap
String for the lens cap
Secure it to the hole
Hole
with a screw.