Table of Contents
Advertisement
are about 20 minutes remaining.
(Warning indicator pertaining to
battery pack temperature)
The battery pack temperature is high. Change
the battery pack or place it in a cool place.
(Warning indicator pertaining to
memory card)
Slow flashing
Free spaces for recording images are running
out. For the type of memory card you can use
with your camcorder, see page 24.
No memory card is inserted (p. 23).
Fast flashing
There are not enough free spaces for recording
images. After storing the images on other
media (p. 51), delete unnecessary images, or
format the memory card (p. 78).
The image database file may be damaged.
Check the database file by touching
[Rec/Media SET] [Repair Img. DB F.]
the recording medium.
The memory card is damaged.
(Warning indicator pertaining to
memory card formatting)
The memory card is damaged.
The memory card is not formatted correctly
(p. 78).
(Warning indicator pertaining to
incompatible memory card)
Incompatible memory card is inserted (p. 24).
(Warning indicator pertaining to
the write-protect of the memory card)
The memory card is write-protected.
Access to the memory card was restricted on
another device.
(Warning indicator pertaining to the
external media device)
The image database file may be damaged.
Check the database file by touching
[Rec/Media SET] [Repair Img. DB F.]
the recording medium.
The external media device is damaged.
(Warning indicator pertaining to
formatting of the external media device)
The external media device is damaged.
The external media device is not formatted
correctly.
(Warning indicator pertaining to the
flash)
Fast flashing
There is something wrong with the flash.
(Warning indicator pertaining to
camera-shake warning)
The amount of lights is not sufficient, so
camera-shake easily occurs. Use the flash.
The camcorder is unsteady, so camera-shake
easily occurs. Hold the camcorder steadily
with both hands and record the image.
However, note that the camera-shake warning
indicator does not disappear.
(Warning indicator pertaining to
photo recording)
The recording media is full.
Photos cannot be recorded during processing.
Wait for a while, then record.
When [
], [1080/50i
cannot capture photos while recording movies.
Furthermore, if [
[1080/25p
record photos while the camcorder is in movie
recording standby mode.
Rec Format] is set to [1080/50p
] or [720/50p
], you
Rec Format] is set to
] or [1080/25p
], you cannot
GB
Advertisement
Chapters
Table of Contents
