Table of Contents
Advertisement
Make sure not to disconnect the USB
cable while [Preparing image database
file. Please wait.] is displayed on the LCD
screen.
If [Repair Img. DB F.] is displayed on the
camcorder screen, select
2
Select [Copy.] on the camcorder
screen.
Movies and photos that are stored on
one of the camcorder's recording media
selected in [Media Select], and that have
not yet been saved on external media
device can be saved on the connected
media device at this time.
This operation is available only when
there are newly recorded images in your
camcorder.
To disconnect the external media device,
select
playback standby mode (either Event View
or Event Index is displayed).
To play back images in the external
media device on the camcorder
Select [Play without copying.] in step 2 and
select the image you want to view.
You can also view images on a TV connected to
your camcorder (p. 45).
When an external media device is connected,
will appear on the Event View screen.
GB
.
while the camcorder is in the
To delete images in the external
media device
1 Select [Play without copying.] in step 2.
[Edit/Copy] [Delete],
2 Select
and then follow the instructions that
appear on the LCD screen to delete
images.
To save the desired images in the
camcorder to the external media
device
1 Select [Play without copying.] in step 2.
[Edit/Copy] [Copy],
2 Select
and then follow the instructions that
appear on the LCD screen to save images.
If you want to copy images that have not yet
been copied, select
[Direct Copy] while your camcorder is
connected to the external media device.
Notes
You cannot use the following devices as an
external media device.
media devices with a capacity exceeding 2 TB
ordinary disc drive such as CD or DVD drive
media devices connected via a USB hub
media devices with built-in USB hub
card reader
You may not be able to use external media
devices with a code function.
The FAT file system is available for your
camcorder. If the storage medium of the
external device was formatted for the NTFS file
system, etc., format the external media device
using the camcorder before use. The format
screen appears when an external media device
is connected to your camcorder. Make sure that
important data has not previously been saved
on the external media device before you format
it using the camcorder.
Operation is not assured with every device
satisfying requirements for operating.
[Edit/Copy]
Advertisement
Chapters
Table of Contents
