Table of Contents
Advertisement
Configuring SNMP
The SNMP page allows you to configure the SNMP server settings.
To change the SNMP settings of the access point, follow these steps:
1.
Click Administration > SNMP.
2.
Configure the SNMP setting.
•
SNMP—Simple Network Management Protocol (SNMP) is a popular network
monitoring and management protocol. It provides network administrators with the
ability to monitor the status of the access point and receive notification of any critical
events as they occur on the access point. To en able the SNMP support feature, click
Enabled. Otherwise, click Disabled. The default is Disabled.
•
Version— Select the version(V1&V2, V3)for SNMP service.
•
System Contact—Enter the name of the contact person, such as a network
administrator, for the access point.
System Location— Enter the location of the access point.
•
•
Security Level— If you choose SNMP V3 as the SNMP version, you have to choose
one security level for it. Based on the level you choose, you have to fill the following
fields.
48
Advertisement
Table of Contents
Need help?
Do you have a question about the WAP-350N and is the answer not in the manual?