Status and Statistics
This section describes how to change the status settings for the access point:
•
"Checking System Summary"
•
"Checking Interface Statistics"
•
"Checking TCP/UDP Services"
•
"Checking View Log"
•
"Checking Associated Clients"
•
"Checking Site Survey Scan"
Checking System Summary
The System Summary page displays the access point's current status information for the local
network.
To check system information and local network status, follow these steps:
1.
Click Status and Statistics > System Summary.
This page displays the status information of your access point:
•
System Information
- PID VID—The description of the access point.
- Hardware Version—The version of the access point's current hardware.
- Firmware Version—The version of the access point's current software.
9
Need help?
Do you have a question about the WAP-350N and is the answer not in the manual?