Replacing the
battery
Installing the screen
Selecting a
location
Mounting the
screen
The remote control only works with a 3V CR2032 battery.
Make sure the battery is correctly positioned before inserting it into the
remote control.
Install the screen in an easily accessible and visible location.
Do not install the screen in the airbag deployment area or in a possible head
impact area.
The mounting location for the screen must be clean and free from grease or dust.
Prior to installation, clean the area with an appropriate cleansing product.
Once you have stuck the support on the dashboard, wait for approximately 2
hours to make sure the adhesive tape adheres well.
10