How To Learn More About Ulead Dvd Moviefactory; Important Information For Use - Toshiba Satellite L350 series User Manual

How to make a DVD-Video
Simplified steps for making a DVD-Video from video data captured from a
DV-Camcorder:
1. Click Start
Ulead DVD MovieFactory for TOSHIBA Launcher to launch DVD
MovieFactory.
2. Insert a DVD-RW or DVD+RW disc in Burner.
3. Click Video Disc
dialog box ,choose DVD-Video/+VR to invoke Straight Capture to
Disc Page.
4. Choose DVD-Video format.
5. Choose the capture source is DV.
6. Press Capture button.
Simplified steps for making a DVD-Video from adding video source:
1. Click Start
Ulead DVD MovieFactory for TOSHIBA Launcher to launch DVD
MovieFactory.
2. Click Video Disc → New Project to invoke 2nd Launcher, choose your
project type, then invoke DVD MovieFactory.
3. Add source from HD Disk by click Add Video files button to invoke
browser dialog box.
4. Choose the source video then go to Next page to apply Menu.
5. After choose the menu template, press Next button to go to Burning
Page.
6. Choose the output type then press Burn button.

How to learn more about Ulead DVD MovieFactory

Please refer to the Help and Manual files for additional Ulead DVD
MovieFactory information.

Important information for use

Note the following limitations when you write Video DVD:
1. Editing digital video
■
■
■
■
■
User's Manual
All Programs
→
Burn Video to Disc to launch Direct Recording
→
All Programs
→
Log in with Administrator rights to use DVD MovieFactory.
Make sure that your computer is running on AC power when using
DVD MovieFactory.
Operate the computer at Full Power. Do not use power-saving
features.
While you are editing DVD, you can display preview. However,
if another application is running. The preview might not display
properly.
DVD MovieFactory cannot edit or play copy protected content.
DVD MovieFactory for TOSHIBA
→
DVD MovieFactory for TOSHIBA
→
Operating Basics
→
→
®
4-32