GE PK916 Owner's Manual page 19

The oven door must be closed and all controls must be set correctly for the cycle to work properly.
How to Delay the Start of Cleaning
Press the Self Clean Std/Low pad once for
a 4-hour clean time or twice for a 3-hour
clean time.
A 3-hour self-clean time is recommended
for use when cleaning small, contained
spills. A self-clean time of 4 hours or longer
is recommended for a dirtier oven.
If a time other than 4 hours or 3 hours is
needed, use the number pads and enter
the desired clean time.
You can change the clean time to any time
between 3 hours and 5 hours, depending on
how dirty your oven is.
Press the Delay Start pad.
Using the number pads, enter the time of
day you want the clean cycle to start.
Press the Start pad.
After a Clean Cycle
You may notice some white ash in the oven.
Wipe it up with a damp cloth after the oven
cools.
If white spots remain, remove them with a soap-
filled steel-wool pad and rinse thoroughly with a
vinegar and water mixture. These deposits are
usually a salt residue that cannot be removed by
the clean cycle.
A white discoloration may appear after
cleaning if acidic or sugary foods were not
wiped up before the clean cycle. This is normal
and will NOT affect performance.
If the oven is not clean after one clean cycle,
repeat the cycle.
■ You cannot set the oven for cooking until the
oven is cool enough for the door to unlock.
■ While the oven is self-cleaning, you can press
the Clock pad to display the time of day. To
return to the clean countdown, press the Self
Clean Std/Low pad.
Standard Racks
If they become hard to slide, wipe their
side edges and the oven rack supports with
cooking oil.
The door locks automatically. The display will
show the start time. It will not be possible to
open the oven door until the temperature
drops below the lock temperature and the
LOCKED light goes off.
When the LOCKED light goes off, you will be
able to open the door.
NOTE: On double oven models, you can set a
delay clean in both ovens at the same time. The
second oven set will automatically delay the
start of cleaning until the end of the first oven's
clean cycle.
To recall the start time of the second oven set,
press the Delay Start pad on the controls for
the second oven.
Extension Rack
If it becomes difficult to slide or if the release
levers become difficult to use, see Extension
Rack in the Care and Cleaning section. Do not
spray extension rack with cooking spray or other
lubricant sprays.
If it becomes hard to remove or replace, wipe
the oven rack supports with cooking oil. Do not
wipe cooking oil on the slides.
NOTE: After the first self-clean cycle, the gray
stainless steel surfaces will change color on
enameled extension racks. This is normal. It is not
recommended to self-clean nickel extension racks
as the whole rack will discolor because of the self-
clean temperatures.
GEAppliances.com
19