Turning Power On And Off; Selecting The Disc; Displaying A Disc List; Switching Between Ntsc And Pal - Alpine DHA-S690 Owner's Manual

Turning Power On and
on
Play Position Memory Function
If you turn power off or switch the ignition key to OFF during
playback or change the source, playback will continue from
the point where playback stopped when the power is
turned ON again. The play position memory is cancelled
when the magazine is removed or a disc is changed.
Caution
• To customers using the ALPINE head unit.
Before using this unit connected to an Ai-NET compatible
AV head unit or Ai-NET compatible head unit, make the
appropriate settings in "Setting the System Switch" (page
4/).
• With this unit connected to an Ai-NET compatible AV head
unit or Ai-NET compatible head unit, there may be some
delay during power-up from the remote control. This is
caused by the systems communications being carried out by
the various components and is not a defect.
• When connected with an Ai-NET compatible AV head unit
or Ai-NET compatible head unit, the power cannot be
turned offfrom the remote control. Tum off the DHA-S690
power by switching the head unit's source. For details, refer
to "Operatingjrom the Head Unit" (page 25).
1
Set the head unit's source to DVD changer or CD
changer.
The power turns on.
2
To turn the power off, change the head unit's
source.
Caution
To customers connecting the head unit without Ai-NET.
When using this unit without an Ai-NET connection, read
"Setting the System Switch" on page 41 and set "system
switching" to "2" (STANDALONE).
1
Press PWR of the remote control.
The power turns on.
2
To turn the power off, press PWR again.
Selecting the Disc
Press and hold anyone of the buttons (1 through 6) for
at least 2 seconds.
The 1 through 6 buttons correspond to the disc number 1 to 6.
• You can change a disc by pressing DISC ..., ... or pressing and
holding FOWER DNIUP for at least 2 seconds.
Displaying aDisc UBI
Disc infonnation loaded on the unit is displayed as a list, and disc
change can be directly perfonned.
1
Press and hold LIST for at least 2 seconds.
The disc list is displayed.
Disc list display example
.OISC LIST
DISC UEDIA. CONTENTS
DVO DVD-Y
-
N O DISC
CD COMPRESS
DVD
DVO DVO-A
CD
®
@
CD
Displays disc No.
@
Displays disc media.
• "NO DISC" is displayed if no disc is loaded on the
tray.
®
Displays content information.
DVD-V : DVD Video
DVD-A : DVD Audio
VCD : Video CD
DVD-VR : DVD-VR
CDDA : CD-DA
COMPRESS: Compressed Audio (MP3NVMNAAC/
ASFNVAV/JPEG/DivX®)
: If a disc cannot be read.
2
Press ... or ... to select the desired disc, and then
press ENT.
The unit changes to the selected disc and starts
playback.
SWRchlng between NTSe and PAL
Set the output configuration to NTSC or PAL, depending on the disc.
Press and hold PWR for at least 2 seconds.
• PAL is the standard. The system is set to PAL at time of shipment
from the factory.
• To play back an NTSC compatible disc, change the setting by
referring to "Setting the IV System" (page 2/).
Initial System Start-Up
Be sure to press the RESET button when using the unit for the first
time, after changing the car battery, etc.
1
Turn off the unit power.
2
Press RESET with a ball-point pen or similar
pointed object.
9-EN