Subscribe to Our Youtube Channel
Related Manuals for Novus NVC-125B
Summary of Contents for Novus NVC-125B
- Page 1 USER`S MANUAL VER. 1.0 B/W CAMERA NVC-125B NOVUS SECURITY Sp. z o.o. 359 Pulawska Str., 02-801 Warsaw, Poland tel: +4822-546-0-500; fax: +4822-546-0-519 info@novuscctv.com; www.novuscctv.com © Copyright 2003, NOVUS SECURITY Sp. z o.o.
- Page 2 Signals needed to control the auto iris lens. 5) Auto iris lens control cable 2)Flange-back Adjusting Ring (SIDE VIEW) 3)Camera Mounting Screw Hole 4)Auto Iris Lens Connector 1)Auto Iris Lens 5)Auto Iris Control Cable © Copyright 2003, Novus Security Sp. z o.o. All rights reserved.
-
Page 3: Rear View
8) Vertical Phase Adjuster If the Sync Selection switch is set to the Line Lock ON mode, this potentiometer can be adjusted to synchronize this camera the other in a system. © Copyright 2003, Novus Security Sp. z o.o. All rights reserved. -
Page 4: Connecting Cable
Determine the type of cable according to the distance of the connected equipment. *Do not turn any component’s power on until all connections are completed. © Copyright 2003, Novus Security Sp. z o.o. All rights reserved. - Page 5 Connect the lens cable of the galvanometric pin4 type lens. If the plug on the cable is of a different type, pin2 replace it with the provided 4-pin iris plug. © Copyright 2003, Novus Security Sp. z o.o. All rights reserved.
- Page 6 Connector Cover DC Control Video Control Pin No Type Type Damp(-) Power(+9V) Iris Control Cable Damp(+) Not Used Lens Connector Base Drive(+) Video Signal Auto Iris Lens Pin Arrangement DIMENSION © Copyright 2003, Novus Security Sp. z o.o. All rights reserved.
-
Page 7: Specifications
Storage Humidity Under 90% Non-condensing Dimension 58 x 53 x 133mm 350 gr Weight CONTENTS OF THE PACKAGE Auto Iris Lens Connector L-Wrench Mount adaptor User guide 2 Screws © Copyright 2003, Novus Security Sp. z o.o. All rights reserved. - Page 8 NOVUS SECURITY Sp. z o.o. All rights reserved © NOVUS SECURITY...
Need help?
Do you have a question about the NVC-125B and is the answer not in the manual?
Questions and answers