Panasonic SC-PT770 Operating Instructions Manual page 29

AUDIO menu
Select to suit the type of equipment you connected to the HDMI AV OUT
terminal.
Select "BITSTREAM" when the equipment can decode the bitstream
(digital form of 5.1-channel data). Otherwise, select "PCM".
(If the bitstream is output to the equipment without a decoder, high levels
of noise can be output and may damage your speakers and hearing.)
DOLBY DIGITAL"
_BITSTREAM
-PCM
DTS"
-BITSTREAM
-PCM
• When audio is output from HDMI AV OUT terminal, and the connected
equipment does not support the item selected, the actual output will
depend on the performance of this connected equipment.
- OFF: When not using the HDMI AV OUT terminal for video output.
Video output will not depend on the connected equipment, but
on this unit.
AUDIO OUT
- ON: When audio output is from the HDMI AV OUT terminal.
(Depending on the capabilities of the connected equipment,
audio output may differ from the audio settings of the main unit.)
- QEE:
When audio output is not from the HDMI AV OUT terminal. (The
audio is output using the settings of the main unit.)
RGBRANGE
This works only when "COLOR SPACE" in Menu 4 (HDMI) is set to RGB
(Q 23).
-STANpARD
- ENHANCED: When the black and white images are not distinct.
DYNAMIC RANGE
- ON: Adjusts for clarity even when the volume is low. Convenient for
late night viewing. (Only works with Dolby Digital)
-QEE
VIERA Link
- QH: The VIERA Link "HDAVI Control" function is available (Q 24).
-OFF
DISPLAY menu
Circle of constant primary listening distance
If either distance
®
or
®
is less than @, find the difference in the table
and change to the recommended setting.
The display is dimmed.
(SURROUND OUTPUT indicator will turn off even if it is
activated.)
The display is dimmed, but brightens when you perform some
operations. (The SURROUND OUTPUT indicator will turn on
if it is activated, when you perform some operations.)
-AUTO:
FLDIMMER
Change the brightness of the unit's display and indicator.
-BRIGHT
-DIM:
TV AUDIO
Select the TV audio input to work with the VIERA Link operations (Q 24).
- Al.lX
-DIGITAL IN
DVD-VRJDATA
Select to play only DVD-VR or DATA format.
- DVD-VR: To play the video programs on DVD-RAM or DVD-R/-RW.
- DATA: To play the data files on DVD-RAM or DVD-R/-RW.
POWER OFF LINK
Select the desired power off link setting of this unit for VIERA Link operation
(Q 24). (This works depending on the settings of the connected VIERA Link
"HDAVI Control" compatible equipment.)
- VIPEO/AUDIO: When the TV is turned off, this unit will tum off
automatically.
- VIDEO: When the TV is turned off, this unit will turn off except during the
following conditions:
- audio playback
(@Q]
I
MP311 WMA
I)
-iPod mode
-radio mode
- "AUX" or "D-IN" mode (non-selected TV audio setting for
VIERA Link)
OTHERS menu
JPEGTIME
Set the speed of the slideshow.
Factory preset:
~
-1 SEC to 15 SEC (in 1-unit steps)
-15 SEC to 60 SEC (in 5-unit steps)
- 60 SEC to 180 SEC (in 30-unit steps)
5ms
15ms
10ms
150 cm (5 feet)
300 cm (10 feet)
450 cm (15 feet)
Approximate room dimensions
4ms
2ms
5ms
3ms
1ms
90 cm (3 feet)
30 cm (1 foot)
60 cm (2 feet)
150 cm (5 feet)
120 cm (4 feet)
SPEAKER SETTINGS
Select the delay time of the speakers.
(Effective when playing 5.1-channel sound)
(Center and surround speakers only)
For optimum listening with 5.1-channel sound, all the speakers, except for
the subwoofer, should be the same distance from the seating position.
If you have to place the center or surround speakers closer to the seating
position, adjust the delay time to make up for the difference.
[J :
Actual speaker position
• : Ideal speaker position
®
(ji)
@ :
Primary listening
distance
-SETTINGS:
- C DELAY (Center Delay):
~,
1ms, 2ms, 3ms, 4ms, 5ms
Select the delay time for your center speaker.
- LS/RS DELAY (Left Surround/Right Surround Delay):
~, 5ms, 10ms, 15ms
Select the delay time for your surround speakers.
- TEST TONE: SETTING
Use the test tone for speaker level adjustments (Q 17, Adjusting
the speaker output level manually).
LANGUAGE
Choose the language for the on-screen messages.
- ENGLISH - FRANl;AIS - ESPANOL
HDMI menu
SCREEN DIMMER
This is to prevent burn marks on the TV screen.
-OFF
- WAIT 5 MIN: If there is no operation for 5 minutes, the picture turns
gray. The TV screen will resume when you perform some
operations. (This does not work during video playback.)
-
VIDEO PRIORITY
- QN: When using the HDMI AV OUT terminal for video output. The
resolution of the video output from the HDMI AV OUT terminal is
optimized according to the capability of the connected
equipment (e.g. TV).
DEFAULTS N
This returns all values in the MAIN menu to the default settings.
~
-RESET
g
The password screen is shown if "RATINGS" (Q 28) is set. Please enter
0::
the same password, then turn the unit off and on again.