Adjusting The Speaker Output Level Manually - Panasonic SC-PT770 Operating Instructions Manual

Adjusting the speaker output level manually
Preparation
• To display the picture. tum on the TV and select the appropriate video
input mode.
• Press [+. - VOL) to adjust the volume to normal listening level.
• Select "TEST TONE" from "SPEAKER SETIINGS" in AUDIO menu
(0) 29).
r:.XIT SETUP
Test tone will be output to each channel in
the following order.
LEFT. CENTER, RIGHT.
SURROUND RIGHT. SURROUND LEFT
AdJust'thespeakeriev"effor
each"~'~""
speaker. (CENTER, SURROUND
RIGHT, SURROUND LEFT)
-6 dB to +6 dB (Factory preset: 0 dB)
• To exit the screen. press [SETUP).
l!l
(Effective when playing 5.1-channel sound or when "CCPLII" lights,)
<D
Press and hold [-CH SELECT] to select the speaker.
While the speaker channel is displayed. press [-GH SELECT],
L_ C- R-. RS-. L5- SW
t I
• You can adjust SW (Subwoofer) only if the disc includes a
subwoofer channel and "CCPLII" is not lit.
• "S" appears on the main unit's display when you have selected
"S.SRND" (0) 16, Enjoying surround sound effects). In this case.
you can adjust both surround speaker levels at the same time using
[A.
~l,
S: -6 dB to +6 dB
®
Press [A] (increase) or
[~]
(decrease) to adjust the speaker level
for each speaker.
C. RS. LS. SW: -6 dB to +6 dB
(L. R: Only the balance is adjustable.)
To adjust the balance of the front speakers, while "L" or "R" is selected,
press [ .....
~).
-