Panasonic SC-PT770 Operating Instructions Manual page 23

This works when the HDMI connection is being
used with "VIDEO PRIORITY" (Q 29, HDMI
menu) set to "ON".
To select suitable picture color with your TV
YCbCr 4:2:2"
- Luminance and color details are sent
separately. Most of the picture details are in
luminance. The color rate is much higher than
composite video. Compatible with all
TV
models.
YCbCr 4:4:4"
- All color details are sent. Luminance and
color details are in the same signal.
RGB
- Component video type of signal.
- If the setting above is not compatible with your
TV, it will not be displayed.
*
Terms are descriptions of the sample formats
used in digital video. YCbCr is a video signal
for luminance (Y), blue (Cb) and red (Cr)
details.
To select suitable picture quality with your TV
(Video recordings will be converted to, and output
as, high-definition video.)
" 480p1720p/1080p (progressive)
" 480i/1080i (interlaced)
- If the picture is distorted, press and hold
[CANCEL) until the picture is displayed
correctly. (The output will return to "480p".)
" The numbers displayed depend on the disc
being played. One of the above numbers is
displayed.
This works when the HDMI connection is being
used with "VIDEO PRIORITY" (Q 29, HDMI
menu) set to "ON".
This works when the HDMI connection is being
used with "VIDEO PRIORITY" (Q 29, HDMI
menu) set to "ON".
To sharpen the "720p", "1080i" and "1080p"
picture quality
OFF, 1 (weakest) to 3 (strongest)
To show HDMI information.
(Q below, Confirming HDMI information)
Menu 4 (HOMI)
Automatically detects the film and
video content, and appropriately
converts it.
In addition to "AUT01",
automatically detects film
contents with different frame rates
and appropriately converts it.
Select if the video content is
distorted when using "AUT01" or
"AUT02".
AUT02:
VIDEO:
AUT01:
To make the dialogue in movies easier to hear
I
OVO-Y
I
(Dolby Digital, DTS, 3-channel or higher,
with the dialogue recorded in the center channel)
OFF, ON
If you have chosen "480p"f720p"f1080p"
(progressive), "1080i" (interlaced)
["VIDEO FORMAT" in Menu 4 (HDMI)) or
"PROGRESSIVE" under "VIDEO OUT (lIP)"
(Q 28, VIDEO menu), select the method of
conversion for progressive output to suit the type
of material.
- The setting will return to "AUT01" when the
disc tray is opened, the unit is turned off or
another source is selected.
Mellows images and enhances
detail in dark scenes.
Sharpens images and enhances
detail in dark scenes.
Enhances the contrast for
powerful images.
ANIMATION: Suitable for animation.
To select zoom sizes
NORMAL, AUTO
(I
OVO-YR
II
OVD-Y
II
yeo
I),
x
2,
x
4
-I JPEG I:
during pause
To rotate a picture (during pause)
IJPEGI:
0.....-..... 90.....-.....180.....-.....270
t t
Menu 3 (Audio)
Menu 2 (Video)
Confirming HOMI information
e.g.
HDMI - INFORMATION
CD
=-
I
CONNECTED STATE CONNECTED
=-
0J
AUDIO STREAM PCM
\l>------+-
MAX CHANNEL 2ch
®
CD--}
VIDEO FORMAT 720p
5 COLOR SPACE YCbCr 4:4:4
(j) Connection status
@ Shows the output signal type.
@ Shows the number of audio channels.
@(Q above, VIDEO FORMAT)
®
(Q above, COLOR SPACE)
..
When "OFF" is selected in "AUDIO OUT" (Q 29, HOMI menu), "- - -" will
be displayed in "AUDIO STREAM".
N
N
~
a
a:
-