Table of Contents
Advertisement
9. TECHNICAL SPECIFICATIONS
INPUT section
Output Section
DSP Section
Features
General Performance
General
Connectors
Nominal input sensitivity
Input Impedance
Maximum Input Level
Input Gain
Connectors
Output Impedance
Nominal Output Level
Maximum Out put Level
Output Gain
A/D converters
D/A converters
Internal dynamics
Sampling frequency
Delay Step
Max Delay time
EQ Gain
EQ Bandwidth
PEQ freq
GEQ freq
Memories
Communications
Frequency Response
Dynamic range
Channel Separation
Distortion (THD)
Input Meter
Output Metering
Dimensions
Weight
Power supply
2 x COMBO
0 dB (0.775 V)
30kOhm, electronically balanced
+20dBu
-30 / +6 dB variable in 0.5 dB steps
2 x XLR-M
600 Ohms, electronically balanced
0 dBu
+20 dBu
-30 / +6 dB variable in 0.5 dB steps
24 bit
24 bit
40 bit
48 kHz
21 microseconds minimum
2715 ms
+/15dB, variable in 0.5dB steps
0.05 to 3.00 octaves, variable in 0.05 steps
15.6 Hz to 16 kHz
25 Hz to 20 kHz
FACTORY PRESETS are 10 + 128 USER PRESETS
9-pin RS232, XLR-F RS485 IN, XLR-M RS485 OUT
20Hz - 20kHz, 0.25dB
>117dB 20Hz to 20kHz
>100dB 20Hz to 20kHz
0.05%, 20Hz to 20kHz
-24dB, -18dB, -12dB, -6dB, CLIP relative to Clip point (+20dBu)
-24dB, -18dB, -12dB, -6dB, CLIP relative to Clip point (+20dBu)
483 44 300 mm
4.0 Kg
see label on the unit
22
Advertisement
Table of Contents
