1. Introduction 1. Digital control and DSP technology with graphic display 7 bands Graphic or Parametric equalization. 2. Dynamic range processing with Ratio, Threshold, Attack and Release time control. 3. Tone adjustment with Bass and Treble control. 4. 100 presets: 30 factory presets and 70 user-programmable presets. 5.
2. Technical Specification System Parametric Band 2×7 bands, 4/3octave Bandwidth 20Hz-20kHz 0.015%, Analog In to Analog Out THD+N% 90dB A-Weighted, Analog In to Analog Out Signal to noise ratio Input gain +/-12dB Output gain +/-6dB Preset Factory preset: 30, User preset: 70 Input section Inputs Two 1/4"...
3. Block Digram Hardware: (1)Front panel : LED , UP/DOWN , LINK/EXIT,BYPASS (2)DSP board : TAS3004+MCU(motorola)+EEPROM Wiring Block Digram : TAS3004 EEPROM F r o n t P a n e l DIGAN 2.7 Surface Digram: (The LED panel can display the Gain value of each BAND and the setting)
22Hz~22 kHz. Part 1 Functional Switch Test 1. Connect AC9V/300mA voltage adapter to DIGAN2.7. When the power switch is in the ON position, LED indicates D27. Press POWER button, now it is in the standby mode. It is 0dBu input and 0dBu output of the AP instrument.
Page 20
0dBu+1dBu. THD+N value 0.03%. The diagram of Frequency Response is as Figure 1. 2. Test the Output noise of L/R channel of DIGAN2.7, the value -85dBu. The diagram of Output noise is as Figure 2. 3. Test the S/N value of L/R channel in DIGAN2.70. It is...
Page 21
1. Open DIGAN control program in the computer (as figure 1), then click the new icon (as the arrow indicating). 2. Select the corresponding program. If it is the DIGAN2.7, please select the first one (as the arrow indicating in figure 2).
RKB-2 L type AE00046 solvent solvent AE00284 painting-AC#100 5063 blue MI00597 fixed bracket RKB-2 L type_V1.0 MI02549 fixed bracket DIGAN2.7 right Ltype_V1.0 MI03128 fixed bracket RKB-2 L type AE00046 solvent solvent AE00284 painting-AC#100 5063 blue MI00597 fixed bracket RKB-2 L type_V1.0 7/16"*G20/15*4.8(hexagon)