Table of Contents
Advertisement
Chapter 3 How to Connect IQSlate with Computer
Signal Receiver of the IQSlate is used to communicate with the computer. You can
connect IQSlate and your computer directly or wirelessly.
3.1 Wired Connection
Step 1. Insert the USB terminal of the Signal Receiver into a USB socket of your
computer
Step 2. Insert the Signal Receiver into the receiver socket on the back of IQSlate.
Step 3. If it is the first time you use IQSlate on your computer, you should install the
driver. Then you can start using IQSlate.
3.2 Wireless Connection
Step 1. Open the battery chamber cover and insert the battery in the correct direction,
as show in the picture below.
8
Advertisement
Table of Contents
