Table of Contents
Advertisement
Chapter 6 How to Charge Battery
IQSlate uses a rechargeable lithium battery as the wireless power source. You are
advised to fully charge the battery before using IQSlate. Charging IQSlate is simple.
You only need to connect IQSlate with your computer. IQSlate will take approximately
6 hours to charge.
If you have installed IQSlate driver on your computer, when you connect IQSlate with
your computer, the power indicator will show the battery status, as follows:
The 2 indicators are not
The red indicator is
The green indicator is
lighting or flashing
continuously lighting
continuously lighting
alternately
The battery is not installed The battery is fully charged
The battery is charging
12
Advertisement
Table of Contents
