Table of Contents
Advertisement
Chapter 8 How to Use IQSlate
8.1 How to Use Digital Pen
Single-click: Press the tablet Work Area with pen tip at proper strength.
Double-click: Press the tablet Work Area twice with pen tip at proper strength. Make
sure you press at the same point.
Right-click: Lift the Digital Pen 1mm-1cm from the tablet, and press the side switch of
the Digital Pen.
Move: Lift the Digital Pen 1mm-1cm from the tablet, and move the Digital Pen.
Drag: Use the Digital Pen to press an item, and slide the pen across the Work Area to
drag the item to the desired position.
Write: When you are using IQBoard Software, you can use the drawing tools to
directly write on the tablet Working Area. (The writing strength should be the same as
using the normal pen.)
8.2 How to Use Hotkeys
Using hotkeys is simple. Press the hotkeys with the Digital Pen, and the relevant
functions will be activated. You can customize the functions of these hotkeys.
22
Advertisement
Table of Contents
