Table of Contents
Advertisement
Note:
1. The indicator will only flash for 15 seconds, please finish step 3 within this period. Otherwise,
please redo from step 2.
2. In case the battery is not installed or the tablet is in hibernation status, the Add Tablet
window will not appear. Please check the battery, and press the "Wake Up" button on the left
side of the tablet or press the "Reset" button at the bottom right of the tablet back to reset the
tablet. Then redo from step 2.
3. When there is signal interference, the Add Tablet window may not appear. Please insert the
Signal Receiver into the receiver socket on the back of IQSlate, and press the "Channel" button
on left side of the tablet to change the tablet channel. Then disconnect the Signal Receiver and
tablet, and redo from step 2.
Step 4. In the Add Tablet window, tick the "Connect" check box, and enter a name for
the tablet, then click "OK". This tablet will appear in the tablet list. If you want to add
other tablets, repeat the above steps.
Note:
1. One Signal Receiver can connect up to 63 tablets.
2. To prevent signal interference, please connect only one Signal Receiver to one computer.
7.2.2 Change Tablet Properties
Step 1. When the Signal Receiver is connected to your computer, select a tablet in the
tablet list.
Step 2. Click "Edit" button, and change the tablet name and connecting status.
15
Advertisement
Table of Contents
