Table of Contents
Advertisement
Quick Links
TOUCH LIGHT™ On/Off Remote Control
INSTALLATION AND OPERATING INSTRUCTIONS
This wireless wall on/off/ remote control – system provides a safe, reliable, and user-friendly remote control for
millivolt valve gas appliances. The system can be manually turned on and off with the transmitter. Always check
the appliance home owner's manual for additional information, or warnings regarding accessory installation before
connecting this remote control system.
Carefully inspect the contents for shipping damage. If any parts are missing or damaged, immediately contact the
dealer from whom you purchased the kit. Do not attempt to install any part of the kit unless all parts are in good
condition. Please keep this booklet for future reference.
Battery Alkaline AA (for Transmitter and receiver)
Receiver (Assembly) consists of :
Receiver Box
Slide Button-Black (On/RS/Off)
L-Bracket (Floor Mount)
Wall Cover Plate-Black
Wall Cover Plate-White
Slide Button-White (On/RS/Off)
Screws (for Wall Cover Plate)
Plug-In Wiring Assembly – 18" Inches
Velcro (Loop and Hook)
Wall Anchor Screws
Wall Anchor
Installation Instructions
Screws (for fireplace system control covers)
Wall Bracket
•
Contemporary Ergonomic Table Top or Wall Mount Transmitter with Large LCD Display
•
Battery Powered Transmitter and Receiver
•
Easy Access Battery Door
•
Pre-Programmed for Quick Installation
•
Low battery Indication
•
Child Proof Lock-out
•
16 Security Codes
•
2 hour Shut Down (Optional)
•
Thermal Safety Shutdown (Transmitter Only)
•
Quick Disconnect Wiring Assembly
•
Reset Button
50D0092 Rev 4 Feb 2005
TLM
CONTENTS OF KIT
Description
FEATURES/SPECIFICATIONS
Page 1 of 9
Qty
1
6
1
1
1
1
2
1
1
2
2
1
2
1
Ambient Technologies
A Division Of
Advertisement
Table of Contents
Related Manuals for Ambient Technologies TOUCH LIGHT
Summary of Contents for Ambient Technologies TOUCH LIGHT
- Page 1 TOUCH LIGHT™ On/Off Remote Control INSTALLATION AND OPERATING INSTRUCTIONS This wireless wall on/off/ remote control – system provides a safe, reliable, and user-friendly remote control for millivolt valve gas appliances. The system can be manually turned on and off with the transmitter. Always check the appliance home owner’s manual for additional information, or warnings regarding accessory installation before...
- Page 2 Make sure that the wires do not contact the appliances any place other than at the terminals. Exposure to temperatures higher than 105C (250ºF) may cause the receiver to malfunction or fire hazard. Touch Light Transmitter: 50D0092 Rev 4 Feb 2005 Page 3 of 9...
- Page 3 Installing Batteries: The Touch Light transmitter uses two (2) “AA”- size batteries. To install batteries, Press down the battery door tab and lift up and remove the battery door. Install the battery. Close the battery door by snapping in place Repeat the above step for the other battery.
Need help?
Do you have a question about the TOUCH LIGHT and is the answer not in the manual?
Questions and answers