Econo Operation - Daikin ATXS20G2V1B Operation Manual

ECONO Operation

ECONO operation is a function which enables efficient
operation by limiting the maximum power consumption
value.
To start ECONO operation
1. Press "ECONO button" .
• " " is displayed on the LCD.
To cancel ECONO
operation
2. Press "ECONO button" again.
• " " disappears from the LCD.
Running current and
power consumption
Normal
operation
ECONO
Mode
• This diagram is a representation for illustrative purposes only.
* The maximum running current and power consumption of the air conditioner in ECONO
mode vary with the connecting outdoor unit.
NOTE
• ECONO Operation can only be set when the unit is running. Pressing the OFF button
causes the setting to be canceled, and the "
• ECONO operation is a function which enables efficient operation by limiting the power
consumption of the outdoor unit (operating frequency).
• ECONO operation functions in AUTO, COOL, DRY and HEAT modes.
• POWERFUL and ECONO operation cannot be used at the same time.
Priority is given to the function of whichever button is pressed last.
• Power consumption may not drop even if ECONO operation is used of the level of power
consumption is already low.
Maximum during
normal operation
Maximum during
ECONO Mode
Time
From start up until set
temperature is reached
R
ECONO
TEMP
POWERFUL
MODE FAN
QUIET COMFORT
SENSOR
ON
OFF
TIMER
" disappears from the LCD.
1, 2
ON/OFF
SWING
CANCEL
19