Table of Contents
Advertisement
20
QUICK REFERENCE CHART
If your phone is not performing to your expectations, please try
these simple steps before calling Uniden customer service.
AUSTRALIA 1800 632 789
NEW ZEALAND
0800 4 UNIDEN
0800 4 864336
PROBLEM
The charge light
won't come on
when the handset is
placed in the base.
Audio sounds weak
and/or scratchy.
Can't make or
receive calls.
Handset doesn't ring
or receive a page.
SUGGESTION
• Make sure the AC Adaptor is plugged
into the Base Unit and wall outlet.
• Make sure Handset is properly seated in
Base.
• Make sure that the charging contacts on
the Handset and Base Unit are clean.
• Make sure that the Base antenna is in a
vertical position.
• Move the Handset and/or Base to a
different location away from metal
objects or appliances and try again.
• Check both ends of the Base telephone
line cord.
• Make sure the AC Adaptor is plugged
into the Base and wall outlet.
• Disconnect the AC Adaptor for a few
minutes, then reconnect it.
• Place the handset back on the charging
cradle for a few seconds. The in use
LED will blink indicating that the phone
has been reset.
• The Nickel-Cadmium battery pack may
be weak. Charge the battery on the base
unit for 12-15 hours.
• The handset may be too far away from
the base unit.
• Place the base unit away from appliances
or metal objects.
• Place the handset back on the charging
cradle for a few seconds.
The in use LED will blink indicating that
the phone has been reset.
Advertisement
Table of Contents
