SLC Device Installation
5.6
Input Monitor Module (SD500-AIM)
Wire and mount the SD500-AIM full-size input module as described in this section (see
Figure 5-7 and Figure 5-8). See Section 5.9.2 for information on how to use the on-board
dipswitch to select an address for the module.
Wire the monitor modules to the SLC as shown in Figure 5-7.
SD500-MIM
Control
Panel
SD500-AIM
Figure 5-7 SD500-AIM/MIM Input Module Connection to the FACP (Class B)
151274
5-7
Need help?
Do you have a question about the IntelliKnight 5808 and is the answer not in the manual?