SILENT KNIGHT IntelliKnight 5808 Installation And Operation Manual
  1. Manuals
  2. Brands
  3. SILENT KNIGHT Manuals
  4. Control Panel
  5. INTELLIKNIGHT 5808
  6. Installation and operation manual

SILENT KNIGHT IntelliKnight 5808 Installation And Operation Manual

Addressable fire control panel
Hide thumbs Also See for IntelliKnight 5808:
Table of Contents

Advertisement

Quick Links

Download this manual See also: Operation & Installation Manual
INTELLIKNIGHT
MODEL 5808
Addressable Fire Control Panel
Installation and
Part Number 151274 D, 06/03
Operation Manual

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the IntelliKnight 5808 and is the answer not in the manual?

Questions and answers

Subscribe to Our Youtube Channel

Related Manuals for SILENT KNIGHT IntelliKnight 5808

Summary of Contents for SILENT KNIGHT IntelliKnight 5808

  • Page 1 INTELLIKNIGHT MODEL 5808 Addressable Fire Control Panel Installation and Part Number 151274 D, 06/03 Operation Manual...

  • Page 2: Table Of Contents

    Section 4 Control Panel Installation ...................... 4-1 Mounting the Control Panel Cabinet ....................... 4-1 4.1.1 Removing the 5808 Assembly from the Housing ................4-1 AC Connection ............................4-2 Battery Connection ..........................4-3 4.3.1 RBB Accessory Cabinet ........................4-4 4.3.1.1 Installing the RBB Accessory Cabinet and Batteries ............. 4-4...
  • Page 3 SBUS Wiring ............................4-6 4.4.1 Calculating Wiring distance for SBUS modules ................4-6 4.4.2 Wiring Configurations ........................4-9 Remote Annunciator 5860 Installation ....................4-10 4.5.1 Mounting the 5860 .......................... 4-11 4.5.1.1 Flush Mounting ........................4-12 4.5.1.2 Surface Mounting ......................... 4-14 4.5.2 Model 5860 Connection to the Panel ....................
  • Page 4 6.2.2 Output Circuit Mapping ........................6-6 6.2.3 Zone Event Mapping ........................6-7 6.2.4 Mapping LED Points ........................6-9 Silent Knight Software Suite (SKSS) ....................6-10 Annunciator Programming ........................6-10 6.4.1 Entering / Exiting the Program Menu ..................... 6-11 6.4.2 Moving through the Menus ......................6-12 6.4.3 Selecting Options and Entering Data ....................
  • Page 5 7.3.3 Delete Group ........................... 7-16 7.3.4 View Group Points .......................... 7-17 7.3.5 Edit Output Group Templates ......................7-18 Point ............................... 7-19 7.4.1 Point Programming For SLC ......................7-19 7.4.2 Point Programming For Internal or External Power Module (5496) ....................7-22 7.4.3 Point Programming For 5880 and 5865 Modules ................
  • Page 6 8.3.2 Using the Menus ..........................8-4 Basic Operation ............................8-4 8.4.1 Setting Time and Date ........................8-4 8.4.2 Disable / Enable a Point ........................8-4 8.4.3 View Event History .......................... 8-4 8.4.3.1 To clear the event history ....................... 8-5 8.4.4 Conduct a Fire Drill .......................... 8-5 8.4.5 Conduct an Indicator Test .........................
  • Page 7 Appendix A Compatible Devices ........................A-1 Notification Appliances .......................... A-1 Door Holder Device ..........................A-9 Appendix B Special Characters Lists ......................B-1 Characters used for Naming ........................B-1 151274...

  • Page 8: Introduction

    Section 1 Introduction The 5808 Fire Alarm Control / Communicator is an addressable fire control system that meets the requirements of UL 864. Overview of Basic System The 5808 base system is 127 addressable point sytem with a built-in annunciator which can also be used to program the system.

  • Page 9: Software Features

    About this Manual This manual is intended to be a complete reference for all installation and operation tasks for the 5808. Please let us know if the manual does not meet your needs in any way. We value your feedback! 1.2.1...

  • Page 10: Compatible Products

    Introduction Compatible Products The chart below lists the products available from Silent Knight for use with the 5808. Type of Model Description Device SD500-AIM Contact Monitor Module (switch input). Standard size. (This device replaces Model SD500-FRCM-4. See Note below.) SD500-ARM Relay Module (This device replaces Model SD505-ARM.

  • Page 11: How To Contact Silent Knight

    Note: 5865-3, 5865-4, and 5880 can be used in any combination, up to a total of eight devices on one panel. The following modems have been tested by Silent Knight for compatibility with the 5808 and the Silent Knight Software Suite software packages:...
  • Page 12 Introduction Limitations of Fire Alarm Systems Manufacturer recommends that smoke and/or heat detectors be located throughout a protected premise following the recommendations of the current edition of the National Fire Protection Association Standard 72 (NFPA 72), manufacturerís recommendations, State and local codes, and the recommendations contained in Guide for the Proper Use of System Smoke Detectors, which is made available at no charge to all installing dealers.
  • Page 13 Model 5808 Installation and Operation Manual ï Warning devices (including horns, sirens, and bells) may not alert people or wake up sleepers who are located on the other side of closed or partially open doors. A warning device that activates on a different floor or level of a dwelling or structure is less likely to awaken or alert people.
  • Page 14 Introduction Requirements and recommendations for proper use of fire alarm systems in- cluding smoke detectors and other fire alarm devices: Early fire detection is best achieved by the installation and maintenance of fire detection equipment in all rooms and areas of the house or building in accordance with the requirements and recommendations of the current edition of the National Fire Protection Association Standard 72, National Fire Alarm Code (NFPA 72), the manufacturerís recommendations, State and local codes and the recommendations contained in Guide for the Proper Use of...
  • Page 15 Model 5808 Installation and Operation Manual 151274...

  • Page 16: Agency Listings, Approvals, And Requirements

    763-493-6455 800-328-0103 4. If the 5808 causes harm to the telephone network, the telephone company will notify the user in advance that temporary discontinuance of service may be required. If advance notice is not practical, the telephone company will notify the user as soon as possible.

  • Page 17: Underwriters Laboratories (Ul)

    Systems 1. Use both phone lines. Enable phone line monitors for both lines. 2. You must program a phone number and a test time so that the 5808 sends an automatic daily test to the central station. 3. Do not use the ground start option.

  • Page 18: Before You Begin Installing

    ï A battery cable for batteries wired in series Environmental Specifications It is important to protect the 5808 control panel from water. To prevent water damage, the following conditions should be AVOIDED when installing the units: ï Do not mount directly on exterior walls, especially masonry walls (condensation) ï...

  • Page 19: Electrical Specifications

    Model 5808 Installation and Operation Manual Electrical Specifications Table 3-1 list the terminal block on the 5808 as well as a description of the each individual terminal and their respective electrical rating. For location of the terminals refer to Figure 3-2.

  • Page 20: Wiring Specifications

    Before You Begin Installing Wiring Specifications Induced noise (transfer of electrical energy from one wire to another) can interfere with telephone communication or cause false alarms. To avoid induced noise, follow these guidelines: ï Isolate input wiring from high current output and power wiring. Do not pull one multi- conductor cable for the entire panel.

  • Page 21: Board Assembly Diagram

    Model 5808 Installation and Operation Manual Board Assembly Diagram Phone lines On-board Annunciator In/Out Form C Trouble Relay Form C Relays NAC/Aux Power Circuits Programming Port Key Switch Input SBUS Connections Battery Connections AC Power Input Figure 3-2 Model 5808 Assembly Figure 3-2 shows the circuit boards, and annunciator.

  • Page 22: Calculating Current Draw And Standby Battery

    Filling in the Current Draw Worksheet, Table 3-2 (Section 3.6.2) 1. For the 5808, the worst case current draw is listed for the panel, addressable devices, and all SBUS expanders. Fill in the number of addressable devices that will be used in the sys- tem and compute the current draw requirements for alarm and standby.

  • Page 23: Current Draw Worksheet

    Model 5808 Installation and Operation Manual 3.6.2 Current Draw Worksheet Use Table 3-2 to determine current requirements during alarm/battery standby operation. (Copy the page if additional space is required.) Table 3-2: Current Draw Worksheet Standby Alarm Device # of Devices...
  • Page 24 Before You Begin Installing Table 3-2: Current Draw Worksheet Standby Alarm Device # of Devices Current per Device Current Current Standby: 0 mA 5883 Relay Interface (32 max.) Alarm: 220 mA (22 mA per relay) Total System Current *Auxiliary Devices Refer to devices manual for current rating.

  • Page 25: Maximum Battery Standby Load

    Warning! Silent Knight does not support the use of batteries smaller than those listed in table above. If you use a battery too small for the installation, the system could overload the battery resulting in the installation having less than the required 24 hours standby power.

  • Page 26: Control Panel Installation

    16" W x 26.4" H x 3.5" D (40.64 cm W x 67.06 cm H x 8.89 cm D). The 5808 panel should be located within a secured area, where it is accessible to main drop wiring runs and where it can be easily tested and serviced. End-users responsible for maintaining the panel should be able to hear alarms and troubles.

  • Page 27: Ac Connection

    Model 5808 Installation and Operation Manual AC Connection At installation, connect the AC terminals to the power source as shown in Figure 4-1. It may be necessary for a professional electrician to make this connection. The AC terminals are rated at 120 VAC, 60 Hz, 2.5A .

  • Page 28: Battery Connection

    Control Panel Installation Battery Connection The control panel battery charge capacity is 7.0 to 33.0 AH. The main control cabinet can house batteries up to 18 AH, larger capacity batteries can be housed in a RBB (see Section 4.3.1 for deteails).Use 12V batteries of the same AH rating. Determine the correct AH rating as per your current load calculation (see Section 3.6).

  • Page 29: Rbb Accessory Cabinet

    Model 5808 Installation and Operation Manual 4.3.1 RBB Accessory Cabinet The Model RBB Accessory cabinet can be used when your backup batteries requirements use backup batteries that are too large to fit into the main control panel cabinet. The RBB cabinet holds batteries up to the 33 AH size.
  • Page 30 Control Panel Installation 3. Run extended battery cable from control panel cabinet through conduit to RBB cabinet. See Figure 4-5. RBB Cabinet Cover Screws Conduit Coupler Conduit RBB Cabinet Cover Screws Figure 4-5 Battery Connections in the RBB Cabinet Note: Figure 4-5 is an example of how the wire connections can be routed. However, any other cabinet knock- outs (on either the main control panel or the RBB cabinet), that are not previously being used may be uti- lized to connect conduit between the two cabinets.

  • Page 31: Sbus Wiring

    Model 5808 Installation and Operation Manual SBUS Wiring This section contains information on calculating SBUS wire distances and the types of wiring configurations (Class B). 4.4.1 Calculating Wiring distance for SBUS modules The following instructions will guide you in determining the type of wire and the maximum wiring distance that can be used with control panel SBUS accessory modules.
  • Page 32 Control Panel Installation These cases are marked in the chart with an asterisk (*). Maximum length can never be more than 6,000 feet, regardless of gauge used. (The formula used to generate this chart is shown in the note below). Table 4-1: Wiring Distances Wiring Distance: SBUS Modules to Panel Total Worst Case...
  • Page 33 Model 5808 Installation and Operation Manual Wiring Distance calculation example: Suppose a system is configured with the following SBUS modules: 2 - Module 5860 Fire Annunciator 1 - 5496 Notification Power Expander 1 - 5865 LED Fire Annunciator 1 - 5824 Parallel/Serial Interface...

  • Page 34: Wiring Configurations

    Control Panel Installation 4.4.2 Wiring Configurations Figure 4-7 illustrates Class B configuration. Supervised Power Limited Figure 4-7 SBUS Class B Wiring 151274...

  • Page 35: Remote Annunciator 5860 Installation

    Model 5808 Installation and Operation Manual Remote Annunciator 5860 Installation The optional Model 5860 Remote Annunciator, shown in Figure 4-8, performs the same functions as the on-board annunciator. Operation is identical. Up to 8 annunciators can be added to the 5808 system.

  • Page 36: Mounting The 5860

    Control Panel Installation 4.5.1 Mounting the 5860 This section of the manual describes mounting the remote annunciator. The annunciator can be flush- or surface-mounted. Figure 4-9 shows the parts of the annunciator. Instructions for disassembling and mounting appear on the following pages. Figure 4-9 Annunciator Parts 151274 4-11...

  • Page 37: Flush Mounting

    Model 5808 Installation and Operation Manual The 5860 comes from the factory fully assembled. You must disassemble it for mounting. To disassemble the annunciator, use a 5/64 hex wrench to remove the set screws, located on the bottom of the annunciator bezel. (See Figure 4-10 for location of the set screws.) Figure 4-10 Annunciator Back Box and Bezel Details 4.5.1.1 Flush Mounting...
  • Page 38 Control Panel Installation Flush Mounting with an Electrical Box The 5860 annunciator can be used with the following types of electrical boxes: 4S, single- gang, and double-gang. If an electrical box is used, the box must be 1-3/8î back from the face of the wall to accommodate the annunciator.

  • Page 39: Surface Mounting

    Model 5808 Installation and Operation Manual 4. After the annunciator wiring to the panel has been completed (described in Section 4.5.2), replace the electronic assembly in the back box. Place the bezel over the back box and tighten the set screws on the bezel.

  • Page 40: 5824 Serial/Parallel Interface Installation

    Control Panel Installation 5824 Serial/Parallel Interface Installation The 5824 Serial / Parallel Interface allows you to connect a printer to the panel, so you can print a real-time log of system events, a report of detector status, and event history. Instructions for installing the 5824 appear below.

  • Page 41: Selecting 5824 Options

    Model 5808 Installation and Operation Manual To Parallel Printer To Serial Printer Figure 4-15 Printer Connection 4.6.1 Selecting 5824 Options Configuring the 5824 includes the following steps: ï Add the module to the system. JumpStart will add the module automatically (see Section 6.1).
  • Page 42 Control Panel Installation Printer and Output Port Options 1. From the Main Menu, select for Program Menu. 2. Select for Module. 3. Select for Edit Module. 4. From the list that displays, select the 5824 module you want to configure. 5.

  • Page 43: 5880 Led Driver Module

    Model 5808 Installation and Operation Manual 5880 LED Driver Module The 5880 is an LED driver board that can be used in a wide variety of applications, including as an interface with most customized floor plan annunciator boards. The 5880 can drive up to 40 LEDs and has one PZT controller.

  • Page 44: Facp Connection

    Control Panel Installation 4.7.2 FACP Connection The 5880 connects to the panel via the SBUS. Make connections as shown in Figure 4-18. After the 5880 is connected to the panel, it must be added to the system. This programming step is described in Section 4.9. Supervised Power Limited Figure 4-18 5880 Connection to Main Control Panel Assembly...

  • Page 45: Led Wiring

    Model 5808 Installation and Operation Manual 4.7.3 LED Wiring There are four 12-pin connectors on the 5880 board for connecting LEDs. Each LED gets its power from Pin 11. Internal resistors are sized so that there is approximately 10 mA of current for each LED, no series resistors are required.

  • Page 46: Dry Contact Wiring

    Control Panel Installation 4.7.4 Dry Contact Wiring The 8 input circuits on the 5880 board are for monitoring switch inputs-any type of switch supported by the control panel can be used with the 5880. For example, you can use a 5880 to monitor pull stations, water flow, tamper, reset, or silence switches.

  • Page 47: 5865-3 / 5865-4 Led Annunciator Installation

    Model 5808 Installation and Operation Manual 5865-3 / 5865-4 LED Annunciator Installation The 5865-3 and 5865-4 are LED annunciators. The 5865-4 has 30 mappable LEDs, remote silence and reset key switches, and a general system trouble LED. The 5865-3 has 30 mappable LEDs only.

  • Page 48: Facp Connection

    Control Panel Installation 4.8.1 FACP Connection The 5865 connects to the panel via the SBUS. Make connections as shown in Figure 4-22. After the 5865 is connected to the panel, it must be added to the system. This programming step is described in Section 4.9. Supervised Power Limited Figure 4-22 5865 Connection to the FACP...
  • Page 49 Model 5808 Installation and Operation Manual Slide the labels under the plexiglass as shown in Figure 4-24. The LEDs will show through the label when illuminated. Figure 4-24 Inserting Zone Description Labels 4-24 151274...

  • Page 50: Configuring Modules

    Control Panel Installation Configuring Modules This section describes how to configure any system hardware modules that have been added to the system. 4.9.1 Assigning Module IDs When installing a hardware module (such as, 5824, 5860, 5496, 5865-3 or 5865-4), you must use the dipswitches on the module to assign an ID# to the module.

  • Page 51: Telephone Connection

    Model 5808 Installation and Operation Manual 4.10 Telephone Connection Connect the telephone lines as shown in Figure 4-26. The Model 7860 phone cord is available from Silent Knight for this purpose. A number of programmable options are available for customizing telephone lines. These options are described in Section 7.5.

  • Page 52: Notification Appliance/Auxiliary Power Circuits

    Control Panel Installation 4.11 Notification Appliance/Auxiliary Power Circuits Four outputs are built-in to the 5808 FACP which can be programmed to be used as NACs (Class A or Class B) or as Aux power. This section of the manual explains how to install conventional notification appliances and how these terminals can be used for auxiliary power.

  • Page 53: Class A Notification Wiring

    Model 5808 Installation and Operation Manual 4.11.1.2 Class A Notification Wiring You must use an appliance from the list of compatible appliances in the Appendix at the back of this manual. To install a Class A notification appliance circuit: 1. Wire the Class A notification appliances as shown in Figure 4-28.

  • Page 54: Auxiliary Power Installation

    Control Panel Installation 4.11.2 Auxiliary Power Installation NAC Circuits 1-4 on the control panel can be used as auxiliary power circuits. The three types of auxiliary power available are: ï Door Holder (see section 4.11.2.1) ï Constant (see section 4.11.2.2) ï...

  • Page 55: Constant Power

    Model 5808 Installation and Operation Manual 4.11.2.2 Constant Power Use constant power for applications that require a constant auxiliary power source. Power is always present at Constant circuits. 4.11.2.3 Resettable Power Resettable power is typically used to power beam detectors, flame detectors and conventional 4-wire smoke detectors.

  • Page 56: Remote Station Applications

    Control Panel Installation 4.13 Remote Station Applications 4.13.1 Keltron Model 3158 Installation The control panel is compatible with Keltron Model 3158, used for direct connection to a Keltron receiver. The 3158 reports alarms, supervisories, and troubles. The steps for connecting the 3158 to the control panel. Refer to the 3158 installation instructions for complete information.

  • Page 57: City Box Connection Using The 5220 Module

    Model 5808 Installation and Operation Manual 4.13.2 City Box Connection Using the 5220 Module This section describes how to connect the control panel to a municipal fire alarm box or ì city boxî as required by NFPA 72 Auxiliary Protected Fire Alarm systems for fire alarm service.

  • Page 58: Nfpa 72 Polarity Reversal

    Control Panel Installation 4.13.3 NFPA 72 Polarity Reversal 4.13.3.1 Using the 5220 Module When the 5220 is wired and programmed for polarity reversal, it reports alarm and trouble events to a remote site. Alarms will override trouble conditions and it will not be possible to reset the remote indicator until the condition is cleared and the control panel is reset.
  • Page 59 Model 5808 Installation and Operation Manual 5. If necessary, adjust loop current using the potentiometer (R10) on the 5220 board . Nor- mal loop current is 2-to-8 mA with a 1k ohm remote station receiving unit. Maximum loop resistance is 3k ohm.

  • Page 60: Using The Sd500-Arm Addressable Relay Module

    Control Panel Installation 4.13.4 Using the SD500-ARM Addressable Relay Module When the SD500-ARM is wired for polarity reversal, it reports alarm and trouble events to a remote site. Alarms will override trouble conditions and it will not be possible to reset the remote indicator until the condition is cleared and the control panel is reset.

  • Page 61: Using A Mr-201/T Control Relay From Air Products

    Model 5808 Installation and Operation Manual 4.13.5 Using a MR-201/T Control Relay From Air Products When the MR-201/T control relay is wired for polarity reversal, it reports alarm and trouble events to a remote site. Alarms will override trouble conditions and it will not be possible to reset the remote indicator until the condition is cleared and the control panel is reset.

  • Page 62: Slc Device Installation

    Section 5 SLC Device Installation Caution To avoid the risk of electrical shock and damage to the unit, power should be OFF at the control panel while installing or servicing. Types of SLC Devices The following types of SLC devices can be used with the system. ï...

  • Page 63: Maximum Number Of Devices

    Model 5808 Installation and Operation Manual Maximum Number of Devices A total of 127 addressable devices can be used with the system. Wiring Requirements for SLC Devices The following information applies to all SLC devices. Refer to the section that describes the type of device you are installing for details.
  • Page 64 SLC Device Installation When using T-taps, the total length of all taps and the main bus must not exceed 40,000 feet. This requirement must be met in addition to the maximum distance requirements for the various wire gauges. Figure 5-2 Calculating Wire Run Length for a T-tap 151274...

  • Page 65: Wiring Slc Devices In Style 6 & 7 (Class A)

    Model 5808 Installation and Operation Manual 5.3.2 Wiring SLC Devices in Style 6 & 7 (Class A) Figure 5-3 illustrates how to wire the SLC loop for Style 6 or Style 7 Class A installations. Note: Style 6 does not use short circuit isolator devices.

  • Page 66: Heat And Smoke Detector Installation

    SLC Device Installation Heat and Smoke Detector Installation The information in this section applies to the following models: SD505-AHS Heat Detector, SD505-AIS Ionization Smoke Detector, and SD505-APS Photoelectric Smoke Detector. See also Section 5.9 for information on how to address the detectors. 5.4.1 Wiring 1.

  • Page 67: Duct Detector Installation

    Model 5808 Installation and Operation Manual Duct Detector Installation Figure 5-5 shows the layout of the SD505-ADH duct housing with a detector base in place, including location of the terminals for connection to the FACP. Figure 5-6 shows wiring in detail.

  • Page 68: Input Monitor Module (Sd500-Aim)

    SLC Device Installation Input Monitor Module (SD500-AIM) Wire and mount the SD500-AIM full-size input module as described in this section (see Figure 5-7 and Figure 5-8). See Section 5.9.2 for information on how to use the on-board dipswitch to select an address for the module. Wire the monitor modules to the SLC as shown in Figure 5-7.

  • Page 69: Mini Input Module (Sd500-Mim)

    Model 5808 Installation and Operation Manual Figure 5-8 SD500-AIM/MIM Input Module Mounting Example Mini Input Module (SD500-MIM) Wire the SD500-MIM Mini Input Module as shown in this section (see Figure 5-7 and Figure 5-8). The SD500-MIM fits inside a single-gang electrical box. See Section 5.9.2 for information on using the on-board dipswitch to select an address for the module.

  • Page 70: Relay Module Installation

    SLC Device Installation Relay Module Installation The information in this section applies to Model SD500-ARM Relay Modules. See Section 5.9.2 for information on how to use the on-board dipswitch to select an address for the module. 5.8.1 Electrical Specifications The following is electrical rating information for SD500-ARM relay modules. Relay Ratings 30 VDC @ 2.0 A Resistive 30 VDC @ 1.0 A Inductive (.6PF)

  • Page 71: Slc Device Addressing

    Model 5808 Installation and Operation Manual SLC Device Addressing 5.9.1 EEPROM Addressing Select addresses for the following models through software as described here: ï Model SD505-AHS Heat Detector ï Model SD505-APS Photoelectric Smoke Detector ï Model SD505-AIS Ionization Smoke Sensor You must use the Installer Code to perform this task.

  • Page 72: Dipswitch Addressing

    SLC Device Installation 5.9.2 Dipswitch Addressing Input and relay module addresses are set using the dipswitch that appears on the module board. The chart below shows the available addresses. For example, to select address 3, place dipswitches 1 and 2 in the up position. The range of valid addresses is 1-127 (0 is an invalid address).
  • Page 73 Model 5808 Installation and Operation Manual 5-12 151274...

  • Page 74: Programming Overview

    Section 6 Programming Overview This section of the manual is intended to give you an overview of the programming process. Please read this section of the manual carefully, especially if you are programming the control panel for the first time. The JumpStart feature automates many programming tasks and selects default options for the system.

  • Page 75: Input Points

    Model 5808 Installation and Operation Manual 6.1.1 Input Points JumpStart will determine the number and type of input points (detectors or contact monitor modules) on each SLC loop. JumpStart assigns the correct detector type (heat, ionization or photoelectric), so the installer does not need to edit device type for detectors. Any contact monitor modules on the system will be assigned type "Manual Pull."...
  • Page 76 Programming Overview 4. The message "WARNING Will reset all system options" displays on the LCD. Select Yes to continue. A series of messages displays for the next several seconds. JumpStart scans the SLC loops for devices. This can take several minutes, depending on the number of devices attached.

  • Page 77: Mapping Overview

    Model 5808 Installation and Operation Manual Mapping Overview This section of the manual is an overview of mapping. Details about how to select mapping options appear in the appropriate subsections in Section 7. Mapping is an important concept with the control panel. In general terms, mapping is assigning or linking events to outputs that should activate when events occur.

  • Page 78: Input Point Mapping

    Programming Overview 6.2.1 Input Point Mapping Input points are assigned to input zones. Any input point can be assigned to any input zone. (Input points can be assigned to one zone only. An input point can be designated as "Unused," which means it has not been assigned to a zone.) Figure 6-2 Input Point Assignment Example 151274...

  • Page 79: Output Circuit Mapping

    Model 5808 Installation and Operation Manual 6.2.2 Output Circuit Mapping Figure 6-3 is a simple example showing how to assign notification and relay output circuits to groups. For an example of a simple floor above/floor below application, see Figure 6-5.

  • Page 80: Zone Event Mapping

    Programming Overview 6.2.3 Zone Event Mapping There are 8 types of events that can occur in zones (see below). For each event type, you can activate up to 8 output groups and patterns. If it is necessary to map to more than 8 output groups, an output group template may be used (see Section 7.3.5 for information on output group templates).
  • Page 81 Model 5808 Installation and Operation Manual Figure 6-5 Example of Zone Events Mapped to Output Groups and Patterns 151274...

  • Page 82: Mapping Led Points

    Programming Overview 6.2.4 Mapping LED Points Figure 6-6 is a simple example showing how LED points are mapped to zones and output groups. Typically you would create two output groups for each zone, one for alarms and one for troubles. (LED points are available when Models 5865-3/4 and/or 5880 are used with the system.) Figure 6-6 Example of LED Points Mapped to Output Groups (applies to Models 5865-3/4 and 5880)

  • Page 83: Silent Knight Software Suite (Skss)

    You can then download the file to the panel. The software includes an on-line help system and a manual. See Section 1.3 for a list of modems that have been tested by Silent Knight for compatibility with the control panel and the Silent Knight Software Suite.

  • Page 84: Entering / Exiting The Program Menu

    Programming Overview 6.4.1 Entering / Exiting the Program Menu To enter the Program Mode: 1. Enter the Installer Code (factory programmed default code is 123456). 2. The display prompts you to press the key to bring up the Main Menu (see Figure 6-7).

  • Page 85: Moving Through The Menus

    Model 5808 Installation and Operation Manual 6.4.2 Moving through the Menus Figure 6-8 shows how to move through Menu screens, using the System Options screen as an example. Figure 6-8 Moving through Program Menu (System Options Sub-Menu Used as an Example) 6.4.3...

  • Page 86: Editing Keys

    Programming Overview 6.4.4 Editing Keys The keys shown in Figure 6-9 are available for use when you are in the Program Menu. Figure 6-9 Editing Keys Available from Program Menu 151274 6-13...

  • Page 87: Programming Menu Quick Reference

    Model 5808 Installation and Operation Manual Programming Menu Quick Reference This section of the manual lists all Program Menu options in the order they appear on the sub- menus. Default settings are indicated in text or marked with an asterisk. The comments column provide quick information and a reference to a section (if applicable) which has more detailed information.
  • Page 88 Programming Overview Menu Options/Defaults Comments Enter Name1 Enter Number1 Edit Zone Name Enter Name2 Enter Number2 *1 Count 2 Count Alarm Ver. Verification Type Zone Properties SNGL ILOCK DBL ILOCK Heat Temp Set 135∞ to 150∞ F Manual Pull Edit Zone Select Zone to Edit (MP) (Groups 01 &...
  • Page 89 Model 5808 Installation and Operation Manual Menu Options/Defaults Comments Enter Name1 Enter Number1 See Section Group Name Sec. 7.3.1.1 7.3.1.1. Enter Name2 Enter Number2 Latching *Non- Options Latching Latching *SILENCE Silenceable NON-SIL Non-Silenceable Sec. 7.3.1 Auto Auto Un-silenced Silencing Unsilence Sec.
  • Page 90 Programming Overview Menu Options/Defaults Comments UNUSED PHOTO DETECTOR HEAT Select zone See Section 7.4. PHOT DUCT ION DUCT MAN_PULL LATCH WATERFLOW NLATCH SUPERVSY LATCH NLATCH FIREDRILL SILENCE RESET PAS_ACK SLC Loop Enter Pt SWITCH LATCH See Section 7.4. ZN_AUX1 NLATCH LATCH ZN_AUX2 NLATCH...
  • Page 91 Model 5808 Installation and Operation Manual Menu Options/Defaults Comments For each account (1-4), select: Edit Account # *123456 Account # (6-digit number, identifies account to central station) Sec. 7.5.1 Edit Format *Contact ID Reporting Format (SIA, S20, Contact ID) Sec. 7.5.1...
  • Page 92 Programming Overview Menu Options/Defaults Comments For each phone line (1 & 2), select: Dialing Prefix Up to 8 digits none Sec. 7.5.2.1 # of Answer Rings Range: 00-15 Number of rings before panel answers a call from a computer Sec. 7.5.2.2 Touch Tone TT/PL TouchTone...
  • Page 93 Model 5808 Installation and Operation Manual Menu Options/Defaults Comments 0 - 90 Seconds *30 sec Water Flow delay is the number Water Flow Delay of sec before water flow alarm is generated. Sec. 7.5.4.1 6 - 30 hours *6 hrs...
  • Page 94 Programming Overview Menu Options/Defaults Comments Edit Name Edit Access Code System Reset System Silence System Event Ack. Fire Drill Key System Tests Fire Drill Menu Indicator Test Walk Test no- Report Walk Test w/Report Dialer Test Profile 1 is the profile that dictates Clear History Buffer what functions the Fire Fighter Point Functions...
  • Page 95 Model 5808 Installation and Operation Manual 6-22 151274...

  • Page 96: Programming

    This section of the manual describes how to manually program the control panel from the built-in annunciator. Each subsection discusses these menu options in detail. All options described in this section can be performed using the Silent Knight Software Suite 5660. Important! Before any customized programming is done, JumpStart should be run first.

  • Page 97: Naming Modules

    Model 5808 Installation and Operation Manual 7.1.1.1 Naming Modules You can assign an English name to a system hardware module to make it easier to recognize on a display. 6. If you wish to edit the modules name press the...

  • Page 98: Deleting A Module

    Programming 5. From the next screen, select the number that corresponds to the type of module you are adding from the <New Module Type> screen. The screen will display ì Adding module [#]...î for a few moments. You will be returned to the <New Module Type>...

  • Page 99: Zone

    Model 5808 Installation and Operation Manual Zone Through the zone option in the program menu you can edit, add, delete, and view zone points. Selections made here affect all detectors and switches in the zone. Up to 125 zones can be used in the system.

  • Page 100: Edit Zone Properties

    Programming 8. Select the characters for the zone name by pressing the arrow until the desired character is shown then press Enter the Numerical Designator for the character you want, then press . See Appendix B Table B-1 of this manual for a list of available characters and their numeric designators. 9.
  • Page 101 Model 5808 Installation and Operation Manual Alarm Delay Characteristics 3. Select the alarm delay characteristics by pressing the arrow. Table 7-1 list the delay choices and a description of each. Table 7-1: Alarm Delay Types Type of Delay Description One Count (No Delay). When this option is enabled, an alarm occurs immediately when a...

  • Page 102: Zone Outputs

    Programming Heat Temperature Setting Use this feature to set the temperature that heat detectors will respond. The range is 135∞ to 150∞ F. All detectors in the zone will respond in the same way. The Model SD505-AHS Heat Detector is an absolute temperature device. This means that it responds to an alarm immediately if the temperature in the zone goes above the programmed temperature.
  • Page 103 Model 5808 Installation and Operation Manual 7. Press the key to toggle the the group letter to either G = Group or T = output group template depending on want you need for this zone. Press 8. Select options for each event that could occur in this zone. Figure 7-3 is a complete exam- ple of how you might map a zone.
  • Page 104 Programming Example or Zone Mapping: Suppose you want to program Zone 1 so that: ï Any alarm (detector, water flow or manual pull) would activate Output Group 1 using the ANSI cadence pattern. ï Manual pull alarm would activate Output Group 3 using constant output. ï...

  • Page 105: Cadence Patterns

    Model 5808 Installation and Operation Manual 7.2.1.4 Cadence Patterns The cadence patterns shown in Figure 7-5 are available for use with the control panel. Cadence patterns can be selected by event type for each zone or for the entire system. Special cadence patterns can be selected for fire drills and any auxiliary system switches used with the system..

  • Page 106: Add Zone

    Programming 7.2.2 Add Zone To add a zone, follow these steps: 1. Enter the installer code. 2. Press to display the main menu. 3. Select for Program Menu. Display reads: Initializing Please wait . . . 4. Press to enter zone menu. 5.

  • Page 107: View Zone Points

    Model 5808 Installation and Operation Manual 7.2.4 View Zone Points To view the points in a zone, follow these steps: 1. Enter the installer code. 2. Press to display the main menu. 3. Select for Program Menu. Display reads: Initializing Please wait .

  • Page 108: Group

    Programming Group An output group is made up of output points that have been programmed to respond in the same way. Output groups simplify programming because you do not have to program each individual point. Once you have defined the characteristics of output groups, you can assign each point to the appropriate group.

  • Page 109: Edit Group Properties

    Model 5808 Installation and Operation Manual 8. Select the characters for the zone name by pressing the arrow until the desired character is shown then press Enter the Numerical Designator for the character you want, then press . See Appendix B Table B-1 of this manual for a list of available characters and their numeric designators.
  • Page 110 Programming Silencing Options The following silencing options are available for each output group. Table 7-2: Silencing Options Option Description SILENCE SILENCE Silenceable. The output group can be silenced through the key. NON-SIL SILENCE Not silenceable. The output group cannot be silenced. Activation of the key will be ignored for this output group.

  • Page 111: Add Group

    Model 5808 Installation and Operation Manual 13. Press the arrows to select the desired latching option. 14. Press 15. Press the arrows to select the desired silencing option. Refer to Table 7-2. 16. Press 17. Enable group activation for a condition (see Table 7-3) by pressing the arrows to select Y (yes) or N (no).

  • Page 112: View Group Points

    Programming 7.3.4 View Group Points 1. Enter the installer code. 2. Press to display the main menu. 3. Select for Program Menu. Display reads: Initializing Please wait . . . 4. Press to enter group menu. 5. Press to view group points. 6.

  • Page 113: Edit Output Group Templates

    Model 5808 Installation and Operation Manual 7.3.5 Edit Output Group Templates Some installations may require that zones be mapped to more than 8 output groups. With output group templates you can combine one or all output groups into one template, which can be used when the same combination of outputs are used for several zones.

  • Page 114: Point

    Programming Point You may need to change characteristics of individual input points (detectors and switches) even after using JumpStart. This section explains how to change options for: type of input point; latching/non-latching status (switches); and name and zone assignment of a point. 7.4.1 Point Programming For SLC To program for points, follow these steps:...
  • Page 115 Model 5808 Installation and Operation Manual 9. Select the type of device by pressing the arrows. Refer to Table 7-4 under col- umn heading "Type Selection" for a list of choices. Table 7-4: Point Programming Type Latching Module Type Function...
  • Page 116 Programming Table 7-4: Point Programming Type Latching Module Type Function Comments Selection Option Positive acknowledge switch. This switch must be used in zones programmed as Positive Alarm Sequence (see Table 7-1). If an acknowledge switch closes when an alarm or trouble condition is not already in progress, a trouble PAS_ACK will occur.

  • Page 117: Point Programming For Internal Or External Power Module (5496)

    Model 5808 Installation and Operation Manual 7.4.2 Point Programming For Internal or External Power Module (5496) To program for an internal or external power module points, follow these steps: 1. Enter the installer code. 2. Press to display the main menu.

  • Page 118: Point Programming For 5880 And 5865 Modules

    Programming 13. Select the group by pressing the arrows. 14. Press 15. Edit point name. See Section 7.4.3.1. Press to skip point name edit. 16. Repeat Steps 1 through 15 for all circuits. Function Choices Type Selections Selections for Comments each Type Enter Point or Circuit UNUSED...

  • Page 119: Assigning A Name To A Points

    Model 5808 Installation and Operation Manual 6. Press Figure 7-10 Programming Points Screen for 5880 and 5865 Modules 7. Enter the point number. 8. Press 9. Press the arrows to select the type (Notification or unused). 10. Press 11. Press the arrows to select the desired Group.
  • Page 120 Programming A screen similar to the one shown in Figure 7-2 displays. Figure 7-11 Selecting Character for Zone Name 6. Select the characters for the point name by pressing the arrow until the desired character is shown then press Enter the Numerical Designator for the character you want, then press .

  • Page 121: System Options

    Model 5808 Installation and Operation Manual System Options This section of the manual explains how to customize software options that affect general operation of the system. This includes such items as: AC loss hours, system clock options, holidays schedule, telephone and reporting account options. Refer to each individual subsection for complete instructions.

  • Page 122: Edit Accounts

    Programming 7.5.1.1 Edit Accounts 6. From the next menu, select for Edit Account. A screen similar to one shown in Figure 7-12 will display. The following subsections describe the options on each field. Figure 7-12 Reporting Account Editing Screen Select Account (ID) The control panel provides up to 4 reporting accounts.
  • Page 123 Model 5808 Installation and Operation Manual Select Reporting Format Select a reporting format for each account. Options are: SIA format. 500 events per call. Ademcoís Contact ID format Same as SIA but limits events reported to 20 events per phone call.
  • Page 124 Programming Telephone Number Enter up to 24 characters for phone number for this account. The following special characters are available: Table 7-5: Special Dialing Characters Pound (or number) key on the telephone Star key on the telephone Comma (character for 2-second pause) Use the number buttons on the annunciator or the up- and down-arrow keys to select special characters.

  • Page 125: Auto Test Time

    Model 5808 Installation and Operation Manual 7.5.1.2 Auto Test Time To access the automatic dialer test time screen: 1. Enter the installer code. 2. Press to display the main menu. 3. Select for Program Menu. Display reads: Initializing Please wait . . .

  • Page 126: Dialing Prefix

    7.5.2.2 Number of Answer Rings This option is used in conjunction with the Silent Knight Software Suite 5660. Use the option to determine the number of rings before the panel answers a call from the computer. Range is 00-15 rings.

  • Page 127: Dial Option (Touchtone Or Pulse)

    Model 5808 Installation and Operation Manual 8. Enter the desired number of answer rings, then press 7.5.2.3 Dial Option (TouchTone or Pulse) 9. Press the arrow to select the dial option, then press Dial Option Description PULSE If this option is selected, only pulse dialing will be used for this phone line.

  • Page 128: Answering Machine Bypass

    Programming 7.5.2.7 Answering Machine Bypass This option is used in conjunction with the Silent Knight Software Suite 5660. This feature ensures that an answering machine will not interfere with communication between the panel and the computer. If an answering machine is used at the panel site, enable this feature; if an answering machine is not used, disable the feature.

  • Page 129: System Alarm Cadence

    Model 5808 Installation and Operation Manual Figure 7-14 System Trouble Event Mapping Example 7.5.3.2 System Alarm Cadence Fire drill and system auxiliary alarm events can have special cadence patterns to distinguish them from other types of alarms. See Section 7.2.1.4 for available cadence patterns.

  • Page 130: Miscellaneous Options

    Programming 6. Press for System Alarm Cadence. A screen similar to the one in Figure 7-15 will display. Select a cadence pattern for these special events if required for your application. Figure 7-15 Special Cadence Patterns for Fire Drill and Auxiliary Alarm Events 7.5.4 Miscellaneous Options Through this programming option you can set the water flow delay time, low AC report delay,...

  • Page 131: Low Ac Report Delay

    Model 5808 Installation and Operation Manual 7.5.4.2 Low AC Report Delay Note: You must select 6-12 hours in UL central station installations or 15-30 in UL remote signaling installations. You can adjust the number of hours before a Low AC report will be sent to the central station.

  • Page 132: Miscellaneous Options 2

    Programming 7.5.5 Miscellaneous Options 2 Through this programming option you can turn the strobe synchronization during silence feature On or Off, and select the control panel to report events by zone or by point. To edit miscellaneous options 2: 1. Enter the installer code. 2.

  • Page 133: Edit Banner Message

    Model 5808 Installation and Operation Manual 7.5.6 Edit Banner Message The banner is the message that displays on the panel LCD when the system is normal, that is, when no alarms or troubles exist and no one is currently using system menus. You can create a customized message, which can be up to 40 characters, two lines of 20 characters each.

  • Page 134: Jumpstart Autoprogramming

    Programming JumpStart Autoprogramming IMPORTANT! JumpStart is intended to be used prior to performing any custom programming. Each time JumpStart is executed, all options will be reset to their default values. Do not run JumpStart after you have configured the system through programming. To run JumpStart: 1.

  • Page 135: Computer Account

    Model 5808 Installation and Operation Manual Computer Account An installer at the panel site can initiate communications between the panel and a computer running the SK Fire System Editor (see also Section 8.4.15). In order for this communication to function properly both the computer (running the software) and the control panel must have matching computer account numbers and computer access codes.

  • Page 136: Access Codes

    Programming Access Codes Access codes provide the user access to the control panel functions. Each access code can be customized for each user. This allows some users the ability to access programming and other higher level panel functions, while other users may only need access to lower level functions such as preforming fire drills, or acknowledging trouble conditions.

  • Page 137: Profile Edit Menu

    Model 5808 Installation and Operation Manual To change an access code: 1. Enter the installer code. 2. Press to display the main menu. 3. Select for Program Menu. Display reads: Initializing Please wait . . . 4. Select for System Options.

  • Page 138: Panel Functions

    Programming 7.8.1.3 Panel Functions 14. Press the arrow to move through the list of available functions. 15. Then press to move to Y (yes) or N (no) selection column. 16. Press the arrow to select Y or N. 17. Press 18.
  • Page 139 Model 5808 Installation and Operation Manual 7-44 151274...

  • Page 140: System Operation

    Section 8 System Operation Operation of the control panel is simple. Menus guide you step-by-step through operations. This section of the manual is an overview of the operation menus. Please read this entire section carefully before operating the panel. Press to view Main Menu: Select the desired menu option.

  • Page 141: Lcd Displays

    Model 5808 Installation and Operation Manual 8.1.1 LCD Displays The control panel LCD displays system messages, annunciates alarms, supervisories and troubles; provides status information; and prompts for input. These messages can be up to 80 characters, displaying over four lines of 20 characters each. Annunciator keys beep when they are pressed.

  • Page 142: Menu System

    These options are described in detail in Section 7. View system information, including model and serial numbers and revision System Info number and date. Initiate communication from the panel site between the panel and a Up/Download computer running the Silent Knight Software Suite. 151274...

  • Page 143: Using The Menus

    If a printer is attached to the system (via a Module 5824 Serial/Parallel Interface), you can print event history (see Section 8.4.16). The Silent Knight Software Suite (SKSS) can be used to retain more than 1000 events and to create event history reports.

  • Page 144: To Clear The Event History

    System Operation 8.4.3.1 To clear the event history From the Installer menu select for System Tests. From the test menu select Clear History Buffer. 8.4.4 Conduct a Fire Drill 1. From the Main Menu, press for System Tests. 2. Press for Fire Drill.

  • Page 145: Conduct A Walk Test

    Model 5808 Installation and Operation Manual 8.4.6 Conduct a Walk Test 1. From the Main Menu, press for System Tests. IMPORTANT! If any alarm verification zones are being used, the user will be asked if they wish to disable alarm verification during walk test. This occurs for either walk test option.

  • Page 146: Reset Alarms

    System Operation 8.4.9 Reset alarms Press and enter your code or rotate the key at the prompt. If an external reset switch RESET has been installed, activating the switch will reset alarms. If you are already using system menus when you press , you will not need to enter your code or rotate the key.

  • Page 147: View Status Of A Point

    Model 5808 Installation and Operation Manual 8.4.11 View Status of a Point 1. From the Main Menu, select for Point Status. 2. From the list that displays, press to select the module where this point is located. ENTER The screen that displays will show you if the point has a trouble and will provide sensitiv- ity compliance information.

  • Page 148: Communicating With A Remote Computer

    An installer at the panel site can initiate communications between the panel and a computer running the Silent Knight Software Suite. You can use this feature to upload a panel configuration. For example, if you have made programming changes to an installation on site using an annunciator, you can send your changes to the computer, so that the central station will have the latest data about the installation.

  • Page 149: Working With A Printer

    Model 5808 Installation and Operation Manual 8.4.16 Working with a Printer If you are using the Model 5824 Serial/Parallel Interface, several printing options are available. See Section 4.6 for information about installing the 5824. 1. From the Main Menu, select Printer Options.

  • Page 150: Operation Mode Behavior

    System Operation Operation Mode Behavior The control panel can be in one of seven conditions at any given moment: Normal, Alarm, Prealarm, Supervisory, Trouble, Silenced, and Reset. Table 10-1 describes the behavior of the panel in each of these modes. Table 8-1: Operation Mode Behavior Operation Occurs When...
  • Page 151 Model 5808 Installation and Operation Manual Table 8-1: Operation Mode Behavior Operation Occurs When System Behavior In This Mode You Can Mode Supervisory The system The dialer seizes control of the phone line Press (down arrow) to view the supervisory detects a and calls the central station.
  • Page 152 System Operation Table 8-1: Operation Mode Behavior Operation Occurs When System Behavior In This Mode You Can Mode Prealarm A single detector Touchpad PZT beeps. Press (down arrow) to view the prealarm. A trips in a 2- The LCD displays a screen similar to this screen similar to this one displays.

  • Page 153: Releasing Operations

    Model 5808 Installation and Operation Manual Releasing Operations This control panel supports two types of releasing, Double Interlock Zone, and Single Interlock Zone. The Double Interlock Zone operation requires an interlock switch input in the system, and the Single Interlock does not. An interlock switch is typically a dry-contact pressure switch.

  • Page 154: Single Interlock Zone Releasing

    System Operation 8.6.1 Single Interlock Zone Releasing A single interlock zone utilizes a minimum of two addressable detectors, and a designated manual release switch. Important! Only addressable detectors can be used. No conventional detectors can be used. Each Single Interlock Zone input requires at least one manual release switch. Conditions Required for an Pre-Alert Output Activation If any single addressable detector is activated, the "Pre-Alert"...

  • Page 155: Double Interlock Zone Releasing

    Model 5808 Installation and Operation Manual 8.6.2 Double Interlock Zone Releasing A Double Interlock Zone uses a minimum of two Addressable detectors, a designated manual release switch, and an interlock switch input. An interlock switch is typically a dry-contact pressure switch and will be referred to as an interlock/pressure switch in this document.

  • Page 156: Reporting

    Table 11-1 shows receivers compatible with the control panel. Table 9-1: Receivers Compatible with the Control Panel Manufacturer Model Format Model 9800 SIA and Contact ID Silent Knight Model 9000 (SIA formats) Ademco Model 685 (Contact ID ) Contact ID Sur-Gard SG-MLR2-DG (V. 1.64 or higher)
  • Page 157 Model 5808 Installation and Operation Manual Table 9-2: Reporting Codes for SIA and Contact ID Reporting Formats SIA/SIA 20 Reporting Contact ID "Event Event Classification Module ID# SIA Event Parameter Event Group Event Description Qualifier Contact # Family (System, Zone,...
  • Page 158 Reporting Table 9-2: Reporting Codes for SIA and Contact ID Reporting Formats SIA/SIA 20 Reporting Contact ID "Event Event Classification Module ID# SIA Event Parameter Event Group Event Description Qualifier Contact # Family (System, Zone, (if any) Code (if any) Code or Point)"...
  • Page 159 Model 5808 Installation and Operation Manual Table 9-2: Reporting Codes for SIA and Contact ID Reporting Formats SIA/SIA 20 Reporting Contact ID "Event Event Classification Module ID# SIA Event Parameter Event Group Event Description Qualifier Contact # Family (System, Zone,...

  • Page 160: Installation Records

    Section 10 Installation Records This section of the manual is for you to use if you wish to track of how points, zones, and groups have been programmed. 10.1 SLC Point Record You can use the chart that begins below to keep track of SLC points. Default addresses for ID: On-board: = 33 Table 10-1: Installation Record...
  • Page 161 Model 5808 Installation and Operation Manual Table 10-1: Installation Record Zone / Zone/ Module Addr Description Module Addr Description Group Group On-board On-board On-board On-board On-board On-board On-board On-board On-board On-board On-board On-board On-board On-board On-board On-board On-board On-board On-board...

  • Page 162: Testing And Troubleshooting

    If these suggestions do not solve your problem or if you encounter a problem that is not listed here, contact Silent Knight Technical Support at 800-328-0103 for assistance. 11.2 Common Problems...

  • Page 163: Event History

    Model 5808 Installationand Operation Manual Problem Possible Cause / Suggested Actions SLC devices are not being recognized Check that SLC loop impedance is within the required range. (trouble message "Missing" displays on To measure impedance, use the following procedure. the annunciator).

  • Page 164: Built-In Troubleshooting And Testing Tools

    Testing and Troubleshooting 11.3 Built-in Troubleshooting and Testing Tools The fire control panel has several built-in testing and troubleshooting tools that can be utilized to save time while testing and troubleshooting points and SLC devices. 11.3.1 SLC Device Locator SLC device locator can be used to locate a device on a SLC loop. Follow these steps to locate a particular SLC device: 1.

  • Page 165: Slc Multi Locator

    Model 5808 Installationand Operation Manual 11.3.2 SLC Multi Locator This feature is the same as SLC Device Locator, except you can locate up to 8 devices on a single search. Follow these instructions to locate multiple SLC devices: 1. Select (Point Functions) from the Main Menu.

  • Page 166: I/O Point Control

    Testing and Troubleshooting 11.3.3 I/O Point Control This feature allows you to toggle any output on or off and trip any input device. This can be useful to test a pointís output mapping. Follow these steps to control a I/O point: 1.
  • Page 167 Model 5808 Installationand Operation Manual 11-6 151274...

  • Page 168: Appendix A Compatible Devices

    Appendix A Compatible Devices Notification Appliances For proper operation, you must use polarized devices with a Model 7628 4.7k ohm EOL resistor on each loop. All supervised notification applicances used with the control panel must be polarized. Note: Not all devices can use the Sync feature, be sure to check Table A-1 to ensure the device you have chosen will work with this feature.
  • Page 169 Model 5808 Installation and Operation Manual Table A-1: Compatible Notification Appliances Manufacturer Model Audio Visual Type 5386 8-Tone Horn/Strobe with Sync Strobe 5387 8-Tone Horn/Strobe with Sync Strobe 5388 8-Tone Horn/Strobe with Sync Strobe 5405 Sync Control Unit 5508 Single Gang Sync Strobe...
  • Page 170 Compatible Devices Table A-1: Compatible Notification Appliances Manufacturer Model Audio Visual Type 130-3117C Mini Horn 130-3147C Mini Horn BLV-6 Vibrating Bell BLV-10 Vibrating Bell BLVCH Vibrating Chime H12/24-FC Horn H12/24W-FC Horn H12/24K-FC Horn HC12/24-FC Horn HC12/24W-FC Horn HC12/24K-FC Horn P2415-FC Horn/Strobe P2415W-FC Horn/Strobe...
  • Page 171 Model 5808 Installation and Operation Manual Table A-1: Compatible Notification Appliances Manufacturer Model Audio Visual Type Horn Federal Signal VALS Horn/Strobe GX90-4 Horn GXS-4-15-1 Strobe GXS-4-1575 Strobe GX90S-4-15 Horn GX90S-4-1575 Horn HG124 Horn SHG24-1575 Horn/Strobe SHG24-15 Horn/Strobe Gentex GEC Series...
  • Page 172 Compatible Devices Table A-1: Compatible Notification Appliances Manufacturer Model Audio Visual Type System Sensor PS2475ADA Mini-Horn/Strobe (Cont.) Sync. Module MDLW Sync. Module 46T-G4-24-R Bell 46T-G6-24-R Bell 46T-G10-24-R Bell 46T-G6-24-WS-24-HF-R Strobe/Bell 46T-G10-24-WS-24-HF-R Strobe/Bell 46T-G6-24-WH-24-HF-R Strobe/Bell 46T-G10-24-WH-24-HF-R Strobe/Bell 7001T-12\24-W-FR Strobe Horn 7002T-12\24-W-FR Strobe Horn AES-DL1-R Multitone Horn...
  • Page 173 Model 5808 Installation and Operation Manual Table A-1: Compatible Notification Appliances Manufacturer Model Audio Visual Type CF-BF1-R Chime CH-CF1 Chime CH-CF1-R Chime CH-CF1-W Chime CH-DF1 Chime CH-DF1-R Chime CH-BF1-WS-24-HF-R Strobe Chime CH-CF1-LS-24 Strobe Chime CH-CF1-MS-24 Strobe Chime CH-CF1-IS-24 Strobe Chime...
  • Page 174 Compatible Devices Table A-1: Compatible Notification Appliances Manufacturer Model Audio Visual Type IS1-24-VFR Remote Strobe IS3-24-VFR Remote Strobe ISP-24-HFR Remote Strobe LS-24-VFR Remote Strobe LS1-24-VFR Remote Strobe LS3-24-VFR Remote Strobe LSP-24-HFR Remote Strobe LSM-24-VFR Remote Strobe LS1M-24-VFR Remote Strobe LS3M-24-VFR Remote Strobe LSPM-24-VFR Remote Strobe...
  • Page 175 Model 5808 Installation and Operation Manual Table A-1: Compatible Notification Appliances Manufacturer Model Audio Visual Type NS-24MCM-FR Horn Strobes NS-24MCW-FW Horn Strobes NS-2415W-FR Horn Strobes NS-241575W-FR Horn Strobes NS-2430W-FR Horn Strobes NS-2475W-FR Horn Strobes NS-24110W-FR Horn Strobes NS4-24MCW-FR Horn Strobes...

  • Page 176: Door Holder Device

    Compatible Devices Table A-1: Compatible Notification Appliances Manufacturer Model Audio Visual Type SM-12/24-R Sync Module SR-2415-VFR Sync Strobe SRP-2415-HFR Sync Strobe SR-241575-VFR Sync Strobe SRP-241575-VFR Sync Strobe SR-2475-VFR Sync Strobe SR-2475-HFR Sync Strobe Wheelock SR-24110-HFR Sync Strobe (Cont.) SRP-24110-HFR Sync Strobe V7001T-12\24-W-FR Strobe Horn WM3T-24-FR...
  • Page 177 Model 5808 Installation and Operation Manual A-10 151274...

  • Page 178: Appendix B Special Characters Lists

    Appendix B Special Characters Lists This section contains tables of programmable characters that may be used for device, module, and zone names or phone numbers. Characters used for Naming Table B-1 list the available character and their associated numeric designator. When programming these numbers can be entered as a short cut to using the up or down arrow keys, to select characters when naming a point or zone.
  • Page 179 Model 5808 Installation and Operation Manual 151274...
  • Page 180 Repair and RA Procedure ï All products that are returned to Silent Knight for credit or repair require a RA (Return Authorization) number. Call Silent Knight Customer Service at 800-446-6444 or 763-493- 6435 between 8:00 A.M. and 4:45 P.M. CST, Monday through Friday to obtain a return authorization number.

  • Page 181: Limited Warranty

    Upon return of the defective product, Silent Knight will at its sole discretion, either repair or replace, at no cost, such goods as may be of defective material or workmanship. Customers outside the United States are to return products to their distributor for repair.
  • Page 182 Model 5808 Basic Operating Instructions These Instructions must be framed and displayed next to the 5808 panel in accordance with NFPA 72 fire code for Local Protected Fire Alarm Systems. Test the system in accordance to NFPA 72. Operation Task to Perform...
  • Page 184 7550 Meridian Circle Maple Grove, MN 55369-4927 763-493-6455 1-800-328-0103 Fax: 763-493-6475 © 2003 Silent Knight Part Number 1511274 D, 06/03...

Table of Contents

Save PDF