Table of Contents
Advertisement
User Manual
LCTSD318-326-336
Pattern
D
Preset
Tour
Cruise
Pattern
Zone
Park Time:
Park Time:
Back
Select<Pattern> to enter sub menu and control Pattern :
<Pattern Number>: Select Pattern record number.
<Record>: Here move the camera to desired positions, to recording really passage.
<Test>: The current pattern test.
<Run>: to run the current manual Pattern.
Zone
E
Preset
Tour
Cruise
Pattern
Zone
Park Time:
Park Action:
Back
Select <Zone> to enter sub menu and control 6 zone at personal :name and passage speed.
<Zone Number>: Select zone name.
<Name>: Put desired zone name.
<Left limit >: In here , move the camera to the desired left limit.
<Right limit>: In here, move the camera to the desired right limit .
<Remove>: Select to delete the current Zone.
<Speed>: Set the current scanning speed . Range value is (1-255) .
<Run>: To start scanning the current zone.
Park Time
F
This function let the system automatically run on assigned function after a specific period of idle time. Select time between 1
and 255s to arm function. Select OFF to disable this function.
Park Action
C
Park action refers to the function that system will automatically run when park time is up.The function liable to be constituted
from the: call preset; run tour, cruise or pattern setup.
3.9 Privacy mask - Area privacy setup
System
Lens
Camera
Pan/Tilt
Auto Running
Privacy Mask
Alarm
Exit
pag.
18
Pattern Numbe:
Record:
Test:
Run
Back
Zona Number:
Name:
Left limit:
Right limit:
Remove
Speed
Run
Back
Mask Number:
Mask Setup
Remove Mask
Remove All
Back
www.hrcctv.com
Advertisement
Table of Contents
