Table of Contents
Advertisement
3.4 System Setup
System
Lens
Camera
Pan/Tilt
Auto Running
Privacy Mask
Alarm
Exit
A
Site Info
The menu permits to use have Dome information.
Address: 001
Name: Dome 1
Broadcast ID: 255
Back
B
Display Setup
Here is possible to select information need to display in over-printing.
Dome Name:
Off
Preset Name:
On
Cruise Name:
On
Pattern Name:
On
Zoom:
Off
Orientation:
Off
Alarm Name:
Off
Zone Name Mask: On
Back
C
Boot-up Screen
Here is possible to display starting the Dome information.
Protocol: Pelco PD
Comm: 4800 N 8 1
Address: 001
Model: LCTSD318
Version: 1.01
Call Preset 1 to back
www.hrcctv.com
Site Info
Display Setup
Boot-up Screen
Password
Default
System Reboot
Back
<address>: The parameter is not changeable and display that address is be assigned to the
Speed Dome by DIP-Switch ( pag. 8).
<Name> :Assigning name to a dome helps user to remember which dome it is.
<Broadcast ID>:Each other want to assigne software address to the Speed Dome, Setup here the
desired value.
<Dome Name>:On/Off. To display the camera name.
<Preset Name>: On/Off.To display the preset name .
<Nome Cruise>: On/Off. To display the Cruise name .
<Pattern Name>: On/Off. Arm or disarm the Pattern name up to display.
<Zoom>: On/Off. To display the zoom .
<Orientation>: On/Off. To display the rotation degree .
<Alarm Name>: On/Off. To display current .
<Zone Name Mask>: On/Off. To display the zone name mask crossing by camera.
<Protocol>: Display protocol in use, fil to DIP-Switch 1
<Comm>: Display the communication parameter fil to DIP-Switch 1
<address>: Display assigning address of Speed Dome fil to DIP-Switch 2
<Model>: Display the model in use of three available (LCTSD318-LCTSD326-LCTSD336)
<Version>: firmware version
Call the Preset 1 to back.
User Manual
LCTSD318-326-336
A
B
C
D
E
F
pag.
13
Advertisement
Table of Contents
