Table of Contents
Advertisement
User Manual
LCTSD318-326-336
3. Menu Configuration
To understand the potentiality
note,come true with usual coaxial cable or twisted cable and the BUS RS485 for the Speed Dome management. At the RS485
BUS ,fin place too recorder(DVR) and on the BUS, is possible to put on :LCTspeed dome, HR DVR,HR keyboard (HRKB001 and
HRKB001NET).By these devices is possible to manage and setup the Speed Dome.
3.1 Menu Operation
Use the console Joystick or the HR DVR directional key( up and down) to move in item of menu.
•
Use right Joystick or the HR DVR directional right key to select vary item or go in sub menu.
•
Use the console Joystick or the DVR HR directional key up and down for vary parameter.
•
Use left Joystick or the HR DVR directional left key to give the OK at programming.
•
Select the back item or exit , for return to the past menu or exit to the OSD.
•
Recall 95 preset or call consecutive 2 times preset 1 with in 5 second, the OSD menu it may be activated .Preset recall it may
be at keyboard or HR DVR.
pag.
10
of
LCTSD
camera high speed dome,system
see the followed illustration. Video wiring
www.hrcctv.com
Advertisement
Table of Contents
