Table of Contents
Advertisement
User Manual
LCTSD318-326-336
D
Password
In this menu is possible to bump up the security level if the password is enable.
Input PW : ******
Confirm PW: ******
PW Protection:On
Back
Note:Default password of the system is 123456
E
Default
In this menu is possible to restore factory default settings of Speed Dome.
Password: ******
Setup
Back
System reboot
F
Select <system reboot> the dome reboot immediately to make autotest cycle.
3.5 Lens setup
System
Lens
Camera
Pan/Tilt
Auto Running
Privacy Mask
Alarm
Exit
A
Zoom Speed
Set the zoom speed level to high or low .
B
Digital Zoom
Arm <On> or disarm <Off> digital zoom.
C
Joystick AF/AI
Select function wanted between <AF+AI>, < Iris>, < Focus> and <Off>.
<AF+AI>: Select this option ,camera can put automatically mode auto focus and electronics shutter.
<Iris>: Select this option camera can put on mode automatically only electronics shutter,but focus can also be manually
controlled. (Point E)
<Focus>: Select this option camera can put on mode automatically only focus up,but electronics shutter can also be manually
controlled . ( Point D)
<Off>. Select this option camera do not make any automated control, that is necessary operator intervention.
pag.
14
<Input PW>:For input the password the next sub menu display .
Old PW: ******
Back
Before to change,input the old password.If old password is correct , cursor goes back, behind
"input password" ,so that new password can be input . If old password is not correct,cursor goes
back to front of "input password".
<Confirm PW>:Confirm new password.
<PW protection>: On/Off. Arm or Disarm the password request to access system and save
Preset.
<Password>: Arm the password protection and input user password .
<Setup>: Restore default and remove the configurations.
Zoom Speed:
Digital Zoom:
Joystick AF/AI:
AutoFocus Time:
AutoIris Time:
ALC:
Day/Night
Back
A
B
C
D
E
F
G
www.hrcctv.com
Advertisement
Table of Contents
