Removing the Transport Covers Stacked Setup Configuration and Connecting Diagram System Requirements for Use Terminal assignment NOMOS LT combined with other K&F tops. Cardioid Arrays with NOMOS LT 5.4.1 Setup instructions for a cardioid array 5.4.2 LSBlocks for cardioid use...
Thank you for your decision to buy a KLING & FREITAG product. To guarantee a trouble- free operating of the equipment and to allow your KLING & FREITAG NOMOS LT system to achieve its full potential please read the operating instructions carefully before use. With the purchase of a NOMOS LT, you have acquired a large sound system with the highest possible quality and performance capabilities.
User's manual K&F NOMOS LT Safety Instructions The speaker is solely for professional use in the manner described here. To prevent damage to persons and property, you must set up the speaker in compliance with the specifications of applicable national standards.
Make sure that the stacking feet of subwoofers stacked on top of one another are securely positioned in the grooves of the lower speaker. If you place a top speaker on a NOMOS LT you must always strap the speakers to one another and secure them from falling over.
User's manual K&F NOMOS LT Setup Removing the Transport Covers To remove the transport lid, turn the appropriate catches 180° to completely release the latch. Lift the lid from the speaker. Stacked Setup Securely place the bottom subwoofer onto a level surface.
User's manual K&F NOMOS LT Configuration and Connecting Diagram System Requirements for Use K&F CD 44 Digital System Controller LAB.GRUPPEN FP 10000Q: LAB.GRUPPEN FP 14000: for highpower applications Connector Panel CP 4: These components will be referred to as 'K&F SystemRack' in this manual.
K&F NOMOS LT NOMOS LT combined with other K&F tops. The NOMOS LT can only be combined in 2 channel mode with all K&F top speakers when using the Controller CD 44. To do so, select the desired LS blocks for the top speaker in the Controller CD 44, and combine these with the LS block for the NOMOS LT subwoofer.
K&F NOMOS LT Cardioid Arrays with NOMOS LT The subwoofer NOMOS LT is designed so that it can be used as a cardioid and hypercardioid system in an array of three subwoofers, or in multiples of three. A cardioid array results in an increase of sound pressure towards the front because of the rear-facing subwoofer.
K&F NOMOS LT Fuse in the NOMOS LT To increase the operating safety of the NOMOS LT, the subwoofers are equipped with fuses at the signal input. These fuses reduce the risk of consequential damage resulting from a short circuit (i.e. charred cables / connectors / fire damage).
Transport and Storage The NOMOS LT is protected against short-term moisture. The accessories has to be stored, transported and used in a dry enviroment. The NOMOS LT System is not designed for long- term use in a corrosive environment. Make sure that the system is adequately ventilated during longer storage periods so that possible residual moisture can escape from the equipment.
8 ergonomic handles on the sides, 8 plastic glider, 8 stacking grooves for save stackings of NOMOS LS II, NOMOS LT und Line 212, 2 locking profiles for optional transport cover with 100 mm transport castors, ball proof steel grille with black exchangeable acoustic foam behind the grille, additional speakon®...
User's manual K&F NOMOS LT 11. Dimensions NOMOS LT Weight: 60.6 kg 8 x Plastic Gliders Stacking Grooves for 1 x LINE 212 11 mm 1071 mm [.433 "] [42.165 "] Stacking Grooves Fixing Plate for Distance Rod M20 (K&M 24115) Stacking Grooves for 2 x LINE 212 KLING &...
User's manual K&F NOMOS LT 12. Disposal 12.1 Regulations for Disposal 12.1.1 Germany It is not allowed to dispose of used electrical equipment as domestic waste. But please do not dispose of them at official collecting points for recycling either! All KLING &...
Need help?
Do you have a question about the NOMOS LT and is the answer not in the manual?
Questions and answers