Assembly Instructions; Check Before Riding - Razor Phase 1WO Owner's Manual

aSSEMBly INSTRUCTIONS

q attaching the Wheels
1
Front wheel sequence.
q attaching the Handlebar
1
Loosen the coffin clamp and slide
it upward on the handlebar. With a
twisting motion, push the handlebar
onto the fork until it bottoms out on
the fork headset lock nut.

CHECk BEFORE RIDINg

q Collar Clamp
Using a 5mm Allen wrench, check that the collar clamp bolts are tightened securely.
2
Securely tighten the bolt as
shown
2
With the front wheel pointed
straight ahead, the handlebars
square to the front wheel and
the Phase 2 logo facing the front,
tighten the clamp as shown. Alter-
nately tighten until both bolts are
securely tightened
3
Rear wheel sequence.
3
4
Securely tighten the bolt as
shown
WaRNINg: Failure to
properly install and tighten the
collar clamp may cause the rider to
lose control and fall. If you do not
understand these instructions or
the concept of "tighten securely"
seek the assistance of a qualified
mechanic.