Stamina inLINE 55-1401 Owner's Manual page 8

ASSEMBLY INSTRUCTIONS
STEP 3
Pull the ADJUSTMENT KNOB(23) on the EXTENDING TUBE(2) and insert the HEIGHT ADJUSTMENT
BEAM(3) into the EXTENDING TUBE(2). Lock the HEIGHT ADJUSTMENT BEAM(3) in position by inserting
the pin of the ADJUSTMENT KNOB(23) into one of the adjustment holes in the HEIGHT ADJUSTMENT
BEAM(3) and tightening the ADJUSTMENT KNOB(23).
STEP 4
Insert the PAD TUBE(5) through the hole in the HEIGHT ADJUSTMENT BEAM(3) and secure with BUTTON
HEAD BOLT(M8x1.25x22mm)(34). Slide the FOAM PADS(24) on both ends of the PAD TUBE(5).
STEP 5
Insert the ADJUSTABLE INSTEP FRAME(4) into the HEIGHT ADJUSTMENT BEAM(3) and secure with
BUTTON HEAD BOLT(M8x1.25x22mm)(34) and WASHER(M8)(39).
8