Assembly Instructions - Stamina inLINE 55-1401 Owner's Manual

ASSEMBLY INSTRUCTIONS

Place all parts from the box in a cleared area and position them on the floor in front of you. Remove
all packing materials from your area and place them back into the box. Do not dispose of the packing
materials until assembly is completed. Read each step carefully before beginning. If you are missing
a part, please go to staminaproducts.com to the Services section and order the part needed, e-mail
us at customerservice@staminaproducts.com, or call us toll free at 1-800-375-7520 (in the U.S.). Our
Customer Service Staff is available to assist you from 7:30 A.M. to 5:00 P.M. (Central Time) Monday
through Thursday and 8:00 A.M. to 3:00 P.M. (Central Time) on Friday.
STEP 1
Attach the CUSHION(12) to the MAIN FRAME(1) with BUTTON HEAD BOLTS(M6x1x13mm)(33).
STEP 2
Insert the ARMPIT PAD SUPPORTS(7) into the SWING ARMS(6) on both sides.
NOTE: There are three adjustment holes in the bottom of the SWING ARM(6) which allow the ARMPIT
PAD SUPPORTS(7) to be attached in three different positions. Start with the center position and
adjust if necessary.
Button Pin(9)
Bottom View
7