Drying Times - Ariston TCL73X Use And Installation Manual

Start and Programs
Programs
! If the On/Off light is not lit; Press the On/Off button
SENSOR DRY
What it does...
Program
Cottons Dries your clothes on
High heat setting, ready
for putting away.
Extra Dry
Cottons
Dries your clothes on
High heat setting, ready
for hanging.
Light Dry
Cottons Dries your clothes on
High heat setting, ready
for ironing.
Iron Dry
Permanent press Dries your clothes on
High heat setting, ready
for putting away.
Extra Dry
Permanent press Dries your clothes on
High heat setting, ready
for hanging.
Light Dry
Permanent press Dries your clothes on
High heat setting, ready
for ironing.
Iron Dry
TIMED DRYING
Dries wet clothing that you wish to dry on low heat or small loads (less than 2 lb / 1 kg).
Can be used with High Heat option if you prefer to use a timed program.
Consult suggested drying times (see Laundry).
The last 10 minutes of these programs is the air fluff phase (see next page).
Program
Timed Drying
(160 minutes)
Timed Drying
(120 minutes)
Timed Drying
(90 minutes)
Timed Drying
(60 minutes)
Timed Drying
(30 minutes)
and then select program.
How to set it...
1. Position the PROGRAMS knob on 1.
2. Select any Options, if required.
3. Press the Start/Pause button.
1. Position the PROGRAMS knob on 2.
2. Select any Options, if required.
Press the Start/Pause button.
3.
1. Position the PROGRAMS knob on 3.
2. Select any Options, if required.
3. Press the Start/Pause button.
1. Position the PROGRAMS knob on 4.
2. Select any Options, if required.
Press the Start/Pause button.
3.
1. Position the PROGRAMS knob on 5.
2. Select any Options, if required.
Press the Start/Pause button.
3.
1. Position the PROGRAMS knob on 6.
2. Select any Options, if required.
3. Press the Start/Pause button.
How to set it...
1. Position the PROGRAMS knob on 7
2. Select any Options, if required.
3. Press the Start/Pause button.
1. Position the PROGRAMS knob on 8
2. Select any Options, if required.
Press the Start/Pause button.
3.
1. Position the PROGRAMS knob on 9
2. Select any Options, if required.
3. Press the Start/Pause button.
1. Position the PROGRAMS knob on 10
2. Select any Options, if required.
3. Press the Start/Pause button.
1. Position the PROGRAMS knob on 11
2. Select any Options, if required.
3. Press the Start/Pause button.
Note:
Options available:
Delay Timer, Pre Care,
Post Care.
Note:
Options available:
High Heat, Delay Timer,
Pre Care, Post Care.
EN
7