The Pen Power Supply - WizCom Technologies ReadingPen TS User Manual

Getting Started
CAUTION: To reduce the risk of electrical shock or damage
to the internal components, do not spray liquid directly on
the screen or allow excess liquid to drip inside your Pen.

The Pen Power Supply

The Pen comes with 2 AAA Alkaline batteries.
Safety Points (Batteries)
Always place 2 fresh batteries in the Pen. It is not
advisable to use the Pen with batteries that are not at
the same voltage level.
Do not combine different types of batteries (e.g.
rechargeable and non-rechargeable).
Dispose of used batteries according to the
manufacturer's instructions.
CAUTION: Risk of explosion if battery is replaced by an
incorrect type. Use AAA Alkaline batteries only.
Preserving Battery Usage
To optimize battery usage, go to Set Auto Shut-Off Time
in Preferences in the Pen Main Menu and modify the
settings according to your needs.
External Power Supply (using the USB
cable)
Connecting the Pen to the PC using the USB cable
automatically activates the power supply from the PC. This
has the following implications:
The Pen uses the external power supply when
connected to the PC, so batteries last longer.
Set Auto Shut-Off Time in Preferences is disabled
when the Pen is connected to the PC.
CAUTION: Unsaved information may be lost if the USB
cable is disconnected while using without batteries. It is very
important that the Pen always contains batteries, even when
connected to the PC.
8