Specifying Dpof - Sony DSLR-A350 Instruction Manual

Specifying DPOF
Using the camera, you can specify the images and the number of images to
print before you print images at a shop or with your printer. Follow the
procedure below.
DPOF specifications are left with images after printing. It is recommended
that you unspecify them after printing.
1
MENU button
--+
[B
1
--+
[OPOF setup]
--+
[Marked images]
An image is displayed on the single screen.
2 Select the image with <114/~ on the controller.
3
Select the number of sheets with the
®./8..
buttons.
• To unspecify DPOF, set the number to "0."
4
Press the MENU button.
5
Select [OK] with. on the controller, then press the center of
the controller.
Noles
• You cannot specify DPOF on RAW data files.
• You can specify any number up to 9.
• If you unspecify DPOF, the index print is also canceled.
MENU button
--+
[B
1
--+
[OPOF setup]
--+
[All images] or
[Cancel all]
--+
[OK]
•
3
...
lQ
CD
'"
141