Printing Images Specifying Dpof - Sony a390 Instruction Manual

Printing images
Specifying DPOF
Using the camera, you can specify the images and the number of images to
print before you print images at a shop or with your printer. Follow the
procedure below.
DPOF specifications are left with images after printing. It is recommended
that you unspecify them after printing.
Specifying /unspecifying DPOF on selected images
DPOF specifications can be operated either using the Fn button or the
MENU button. Here operation using the Fn button is described.
1
Fn button t [Specify Printing] t [DPOF setup] t [Marked
images] t [OK]
2
Select the image with b/B on the control button.
3
Select the number of sheets with the center of the control
button.
• To unspecify DPOF, set the number to "0."
4
Press the Fn button.
5
Select [OK] with v on the control button, then press the center
of the control button.
Notes
• You cannot specify DPOF on RAW data files.
• You can specify any number up to 9.
Specifying/unspecifying DPOF on all the images
Fn button t [Specify Printing] t [DPOF setup] t [All images]
or [Cancel all] t [OK] t [OK]
143