Note
• The message "Custom WB error" indicates that the value is beyond the expected
range. (When the flash is used on a subject in close proximity or a subject with a
bright color is in the frame.) If you register this value, the
t:::...~
indicator turns yellow
on the recording informalion display on the LCD monitor. You can shoot at this
point. but it is recommended that you sel the white balance again
to
get a more
correct white balance value.
To call the custom while balance setting
Fn button
-+
[White balance)
-+ t::..-..,j
(Custom)
Note
• If the flash is used when the shuller bUllon is pressed, a custom white balance is
registered Wilh lhe flash light taken into account. Take pictures with the flash in laler
shootings.
94