Printing images
Specifying DPOF
Using the camera, you can specify the still images and the number of
images to print before you print images at a shop or with your printer.
Follow the procedure below.
DPOF specifications are left with images after printing. It is recommended
that you unspecify them after printing.
Specifying /unspecifying DPOF on selected images
1
MENU button t
t [Multiple Img.]
2
Select the image with b/B on the control button.
3
Select the number of sheets with the center of the control
button.
• To unspecify DPOF, set the number to "0."
4
Press the MENU button.
5
Select [Enter] with v, then press the center of the control
button.
Notes
• You cannot specify DPOF on RAW data files.
• You can specify any number up to 9.
Downloaded From camera-usermanual.com Sony Manuals
1 t [Specify Printing] t [DPOF Setup]
171