Specifications - Jensen MP1514BT Owner's Manual

Mobile audio system
Table of Contents

Advertisement

Available languages

Available languages

SPECIFICATIONS

CEAPowerRatings
CDPlayer
Signal-to-noise ratio: >90 dBA
Frequency response: 20 Hz-20 kHz, -3 dB
Channel separation: >55 dB @ 1 kHz
D/A converter: 1 Bit/CH
FMTuner
Tuning range (USA): 87.5 MHz - 107.9 MHz
Tuning range (Europe): 87.50 MHz-108.00 MHz
Tuning range (South America): 87.50 MHz-108.00 MHz
Mono sensitivity: 12 dBf
50dB quieting sensitivity (stereo): 16 dBf
Stereo separation @ 1 kHz: >35 dB
Frequency response: 30 Hz-17 kHz. -3 dB
AMTuner
Tuning range (USA): 530 kHz - 1710 kHz
Tuning range (Europe): 522 kHz-1620 kHz
Tuning range (South America): 530 kHz - 1710 kHz
Sensitivity @ 20 dB signal to noise: 30 uV
Frequency response: 50 Hz-2 kHz., -3 dB
AuxiliaryInput
Input sensitivity: 400 mV RMS for 1 watt RMS into 4-ohms
Frequency response: 20 Hz to 20 kHz, -3 dB
Input impedance: 10 k-ohms
General
Power supply: 11-16 VDC, negative ground
Power Antenna (Blue): 500 mAmp Max, current limited protection.
Operating Temp: 14 0F ~ 140 0F (-10 0C ~ 60 0C)
Fuses: 15 amp fast blow ATO
DIN chassis dimensions: 2" H x 7" W x 6.7" D
(51 mm x 178 mm x 170 mm)
Specificationsaresubjecttochangewithoutnotice�
Power output: 13 watts RMS X 4 channels into
4-ohms @ < 1% THD+N
Signal to noise ratio: 70dBA below reference.
(Reference: 1 watt, 4-ohms)
Frequency response: 20Hz to 20kHz (-3dB),
Auxiliary input used as source reference
Reference supply voltage: 14.4 VDC
MP1514BT
43

Advertisement

Chapters

Table of Contents
loading

Table of Contents