Table of Contents
Advertisement
Installation
non-Japanese cars
Japanese cars
Metal mounting strap
(commercially available)
ars
ars
-
T@
+-
@N
@ @
!T/N
N
T
-
/1
TToyota c
N: Nfssan c
a~8mm
MAX.
i~8mm
M AX.
H ®
H 0
05mm
05mm
1
Refer to the section <Removing the hard rubber
frame> and then remove the hard rubber frame.
2
Align the holes in the unit (two locations on each
side) with the vehicle mounting bracket and secure
the unit with the accessory screws.
~
\
Bend the tabs of the
mounting sleeve with a
screwdriver or similar utensil
and attach it in place.
~\
Self-tapping screw
(commercially available)
Screw (M4X8)
(commercially available)
~
~
• Make sure that the unit is installed securely in place. If the
unit is unstable, it may malfunction (for example, the sound
may skip).
Accessory® ...for Nissan car
Accessory0...forToyota car
&
• During installation, do not use any screws except for
those provided. The use of different screws might result in
damage to the main unit.
• Damage may occur if a screwdriver or similar tool is used
with excessive force during the installations.
16
I
English
Hide quick links:
Advertisement
Table of Contents
