Kenwood KDC-135 Instruction Manual page 13

In Standby mode
Built-in Auxiliary input Setting
• Strong electrical fields (such as from power lines) may
cause unstable sound quality when CRSC is turned ON.
In such a situation, turn it OFF.
In FM reception
eRSC (Clean Reception System Circuit)
Temporarily have reception alternate from stereo to
mono to reduce multi-path noise when listening to
the FM station.
In Standby mode
Manual Clock Adjustment
1
Select Clock Adjustment mode
Push the Control knob towards [FM] or [AM].
Select the "CLCK" display.
2
Enter Clock Adjust mode
Press the Control knob for at least 1 second.
The clock display blinks.
3
Adjust the hours
Push the Control knob towards [FM] or [AM].
Adjust the minutes
Push the Control knob towards
[I~]
or
[~].
4
Exit Clock adjustment mode
Press the [MENU] button.
"On CRSC '
"OFF CRSC"
~
~
The CRSC is ON.
The CRSC is OFF.
In Standby mode
DSI (Disabled System Indicator)
Set the Built-in Auxiliary Input function.
A red indicator will blink on the unit after the
faceplate is removed, warning potential thieves.
"OFFAUW
"On AUW
When selecting the source there's no Auxiliary Input.
When selecting the source there's Auxiliary Input.
"On OSI"
"OFF OSI"
LED flashes.
LED OFF.
Function
of
KDC-135
In Standby mode
Switching preout
Alternating the preout between the rear and
subwoofer. (With the subwoofer the sound outputs
without being effected by fader control.)
"REAW Rear preout.
"SUB" Subwoofer preout.
English
I
13