Kenwood KDC-135 Instruction Manual page 12

Menu system
Control knob
MENU SRC
n
WI'
lrr-1n nn
aO . . . C C
-~
- - - - I
Menu display
In Standby mode
Touch Sensor Tone
Setting the operation check sound (beep sound)
ON/OFF.
4
Exit Menu mode
Press the [MENU] button.
~
~
• When other items those applicable to the basic
operation method above are displayed, their setting
content chart is entered. (Normally the setting listed at
the top of the chart is the original setting.)
Also, the explanation for items that are not applicable
«Manual Clock Adjustment> etc.) are entered step by
step.
Beep is heard.
Beep canceled. "OFF BEEP"
"On BEEP"
1
Enter Menu mode
Press the [MENU] button for at least 1 second.
"MEnU" is displayed.
2
Select the menu item
Push the Control knob towards [FM] or [AM].
Example: When you want to set the beep sound
select the "BEEP" display.
3
Set the menu item
Push the Control knob towards
[~]
or
[~].
Example: When you select "BEEP"/ each time you
push the knob it alternates between "On
BEEP" or "OFF BEEP". Select 1 of them as
the setting.
You can continue by returning to step 2 and
setting other items.
12 I
English
Setting beep sound during operation, etc.
functions.
The Menu system basic operation method is
explained here. The reference for the Menu items
and their setting content is after this operation
explanation.
Menu System