MBR1400 | USER MANUAL – Firmware version 4.4
CRADLEPOINT
Enterprise
8.3.1
(Advanced)
Enabled: Enable the ECM client to contact
the server. While this box is unchecked, the
ECM client will never attempt to contact the
server. (Default: Enabled)
Server Host:Port: The DNS hostname and
port number for your ECM server. (Default:
stream.cradlepoint.com)
Session Retry Timer: How long to wait, in seconds, before starting a new ECM session following a connection
drop or connectivity failure. Note that this value is a starting point for an internal backoff timer that prevents
superfluous retries during connectivity loss.
Unmanaged Checkin Timer: How often, in seconds, the router checks with ECM to see if the router is remotely
activated. Note that this value is a starting point for an internal backoff timer that reduces network usage over time.
Maximum Alerts Buffer: The maximum number of alerts to buffer when offline.
8.3.2
Legacy WiPipe Central Settings (Advanced)
WiPipe Central is CradlePoint's legacy remote
management system.
Enabled: Enables the WiPipe Central client
to contact the server.
Ethernet Communication Only: Select this
to ensure that the WiPipe Central client will
not start unless the WAN is Ethernet.
Registration URL: Register your router using the code provided by CradlePoint when you purchase WiPipe
Central.
© 2013 CRADLEPOINT, INC.
Cloud
Manager
Settings
PLEASE VISIT
HTTP://KNOWLEDGEBASE.CRADLEPOINT.COM/
FOR MORE HELP AND RESOURCES
PAGE 209