Table of Contents
Advertisement
MBR1400 | USER MANUAL – Firmware version 4.4
CRADLEPOINT
Auto
IPv6 auto-configuration mode uses DHCPv6 and/or SLAAC to configure the IPv6 networks. When you select Auto, all of
the following settings are optional (depending on your provider's requirements):
PD Request Size – Prefix Delegation request size. This is the size of IPv6 network that will be requested from the
ISP to delegate to LAN networks. (Default: 63)
Primary IPv6 DNS Server – (optional) Depending on your provider, this may be required. This only takes effect if
the default global DNS setting on the Network Settings → DNS page is "Automatic".
Additional IPv6 DNS Server – Secondary DNS server.
Delegated IPv6 Network – (optional) Network available for delegation to LANs. Depending on your provider, this
may be required. Prefixes specified here only take effect if those supplied by the connection are insufficient to
configure your LANs.
Delegated IPv6 Network – Additional network available for delegation to LANs.
Example Configuration:
© 2013 CRADLEPOINT, INC.
PLEASE VISIT
HTTP://KNOWLEDGEBASE.CRADLEPOINT.COM/
FOR MORE HELP AND RESOURCES
PAGE 141
Advertisement
Table of Contents
