Table of Contents
Advertisement
MBR1400 | USER MANUAL – Firmware version 4.4
CRADLEPOINT
Router Services
8.1.8
By default, router services (Enterprise Cloud
Manager, NTP, etc.) connect to the router via the
WAN. In some setups it makes sense to use the
LAN instead. For example, if your router is used
strictly for 3G/4G failover behind another router, you
may not want to use 3G/4G data unnecessarily.
Select Use LAN Gateway to set your router services
to connect via the LAN.
LAN Gateway Address: Input the IP address of the
LAN side connection. If this is a 3G/4G failover
router operating behind another router, the LAN Gateway Address is the IP address of that other router.
DNS Server and Secondary DNS Server: The primary and secondary DNS server numbers match the static DNS values
(set at Network Settings → DNS). You can leave the default values or set them manually here. (Changing these values
also changes the static DNS values.)
© 2013 CRADLEPOINT, INC.
PLEASE VISIT
HTTP://KNOWLEDGEBASE.CRADLEPOINT.COM/
FOR MORE HELP AND RESOURCES
PAGE 204
Advertisement
Table of Contents
