Qomo INTERACTIVE WHITEBOARD Owner's Manual page 20

Users can calibrate image if the projected touch point is offset from actual
contact location. To calibrate, click 'Calibrate' on the options menu then click
'Start' Using the Interactive Whiteboard white dots will appear on the screen,
to orient the projected image on the board, follow the on screen instructions by
clicking on the white dot each time it appears on the screen. The
orientation data saves in the Interactive Whiteboard software automatically
and remains unchanged until you the next time you calibrate.
Exit Driver Software
When the QOMO Interactive Whiteboard is no longer needed, click "Exit" to
exit the program. The Whiteboard software can be reopened from the start
menu.
Note: There are three situations of Whiteboard connection errors
Shows the QWB56/200/300 White Board is not connected properly
Shows the QWB56/200/300 White Board is in the process of connecting
Shows the QWB56/200/300 White Board is connected properly
2. Hot Keys
There are twelve hot keys on the right and left hand sides of the board.
Note: Only available on 78-inch and 105-inch models, 56-inch and 88
inch model whiteboard only has hot keys on the left hand side. The
functions are listed below:
19