Smart Craft; Magnetic Compass - Sea Ray 220 Select Owner's Manual

S
ECTION
! CAUTION
Always check oil pressure and water gauges while
moving, even if your engine has an alarm.
Shut down engine immediately if gauges are not in
normal ranges, or alarm sounds.
Do not restart engine until problems are corrected.
C. S C G
TM
MART RAFT
(S )
TANDARD
Your boat is equipped with the SmartCraft
mentation system. The SmartCraft
sists of a smart tachometer and speedometer with
display screens.
S C G S
MART RAFT AUGE YSTEM
TM
(F . 2.10.1)
IG
The SmartCraft TM system provides a wide range of
engine, boat systems and environmental informa-
tion to the boat operator to help make your time on
the water more enjoyable by providing accurate
systems information in one convenient location,
right at the helm. Below is a list of features the
TM
SmartCraft system offers.
Refer to the SmartCraft
owner's packet for all SmartCraft
structions.
2.10
2 • G
ENERAL
S
AUGE YSTEMS
TM
instru-
TM system con-
SYSTEM TACH
TM owner's manual in the
TM
operating in-
B A
OAT RRANGEMENT
Some features include:
(Depending on engine type and software version)
System Tach Display
Screen:
• Engine Break-in
• Engine Temperature
• Oil Psi
• Trim and RPM
• Trim and Water Pressure
• Water Pressure
• Battery Voltage
• Engine Hours
• Fuel Flow and Fuel Used
• RPM
• Depth
D. M C
AGNETIC OMPASS
If equipped, your compass, properly corrected, will
indicate magnetic North (not true North). A compass
must be adjusted by a qualified person. The reason
for this is that nearby instruments or objects
containing magnets or current-carrying electrical
wires will influence the compass reading. This is
especially true if you add electronic devices to the
helm station.
M C
AGNETIC OMPASS
(F . 2.10.3)
IG
After your compass has been professionally
adjusted. You will be given a deviation card or chart
indicating the correction to be applied when laying
out a compass course or making navigational
calculations. Keep this correction card or chart
at the helm.
SYSTEM TACH
DISPLAY SCREEN
(F . 2.10.2)
IG
( )
OPTIONAL
220 Select