Zoom Clamp & Gear Sleeve Installation - Ikelite 6801.52 Instruction Manual

Slr-dc housing for the nikon d5200 and for the nikon d5300
Table of Contents

Advertisement

Preparing to Install Zoom Clamp & Gear Sleeve
Determine the type
of lens being used
on the camera.
Type 1 Lenses have
a lens opening that
is NOT larger in
diameter than the
zoom ring, Figure 1.
Type 2 Lenses have a lens
opening that IS larger in diameter than the zoom ring, Figure 2.
Zoom Clamps & Gear Sleeves Included with Housing
There are 2 different
Zoom Clamps and
Gear Sleeves
provided with the
housing. Start with
the suggested Zoom
Clamp and Gear
Sleeve depending
on the Type of
lens being used,
Figures A and B.
14
Type 1 lens
(Figure 1)
Normally used with
Type 1 lens (Figure 1)
9059.8 small diameter clamp:
For use with 0073 sleeve
wide
+
grooved
extension
tabs
thick ribs
0073 sleeve: Use with
small diameter zoom clamp
9059.8
Figure A
lens
opening
zoom
ring
bayonet
mount
Type 2 lens
(Figure 2)
Normally used with
Type 2 lens (Figure 2)
5509.28 Package
9059.9 large diameter clamp:
For use with 0073.1 sleeve
narrow
grooved
extension
tabs
thin ribs
0073.1 sleeve: Use with
large diameter zoom clamp
9059.9
Figure B
+

Advertisement

Table of Contents
loading

This manual is also suitable for:

6801.53

Table of Contents